We thank the staff in the core facilities at the Francis Crick Institute (Biological Research facility, In Vivo Imaging and Experimental Histopathology) and Yolanda Saavedra-Torres and Mercedes Sanchez-Garzon, the vets at Crick and LRI respectively, for their valuable help.&#160;We are grateful to Dr. W. Grey for critically reading the manuscript. D.P. was supported by a non-clinical research fellowship from the EHA. This work was supported by The Francis Crick Institute, which receives its core funding from Cancer Research UK (FC001045), the UK Medical Research Council (FC001045), and the Welcome Trust (FC001045).

All animal experiments were performed under PPL 70/8904, approved by the U.K. Home Office and in accordance with Cancer Research UK guidelines. The use of human umbilical cord blood (UCB) and primary human acute myeloid leukemia (AML) samples was approved by the East London Ethical Committee after receiving consent and was carried out in accordance with the Declaration of Helsinki.
1. Bioengineering Collagen-based Scaffolds with Human Hematopoietic and Stromal Cells
NOTE: The entire protocol should be performed in sterile conditions and with sterile material. Cell culture medium 1 corresponds to hMSC medium (MEM-&#945;, P/S, and 10% hMSC-FBS); cell culture medium 2 corresponds to EC medium (M199, 20% FBS, P/S, 10mM HEPES, 50 &#181;g/mL heparin, 2 mM glutamine and 50 &#956;g/mL ECGS) and cell culture medium 3 corresponds to hematopoietic cell medium (H5100 and P/S).
<ol>
	<li>Prepare umbilical cord blood mononuclear cells (CB-MNCs) or primary AML (bone marrow or peripheral blood MNCs) using a Ficoll-Paque density gradient, according to well-established protocols53.
	<ol>
		<li>For AML, deplete the T cells using OKT.3 antibody. Incubate 4 &#181;g of OKT.3 per 1 x 106 AML MNCs for 30 min at room temperature before washing the cells in PBS. If required, cryopreserve the MNCs in FBS with 10% DMSO at 2 x 108 cells per mL.</li>
	</ol>
	</li>
	<li>Prepare hMSC (culture medium 1) and EC (culture medium 2) cell cultures. Plate hMSC cells (see the Table of Materials) on regular cell culture flasks in hMSC medium. Plate ECs (see the Table of Materials) on collagen 1-coated surfaces in EC medium.</li>
	<li>At 85-90% cell confluence remove the medium, wash twice with PBS, and add trypsin-EDTA solution (20 &#181;L per cm2).
	<ol>
		<li>After 5 min, check that cells are detached. Recover the cells by diluting 1:3 with cell culture medium. Centrifuge at 300 x g for 5 min and re-suspend in the corresponding medium for each cell type and count the cells using a Neubauer chamber.</li>
		<li>Use cells at 2 x 106 - 107 cells per mL. If both cell types need to be used together, mix the hMSC and EC suspensions in a 1:1 ratio.</li>
	</ol>
	</li>
	<li>Transfer the cell suspension to an insulin syringe.</li>
	<li>Using a scalpel, cut the sterilized gelatin sponge (e.g., gelfoam) initial scaffold (20 mm x 60 mm x 7 mm) into 24 pieces of similar size (6.6 mm x 7.5 mm x 7 mm; Figure 1A and B).</li>
	<li>Reconstitute gelatin scaffolds by immersion in PBS (5 min).</li>
	<li>One by one, gently put the scaffolds on a sterile tissue to remove excess PBS. Transfer the scaffolds to one well of a 24-well plate (ultra-low attachment surface) and use the syringe to inject 50 &#181;L containing 105 - 106 cells (hMSC alone or in combination with hEC; Figure 1C).</li>
	<li>Repeat step 1.7 with each scaffold until all required scaffolds are seeded with stromal cells.</li>
	<li>Incubate for 1 h inside a cell culture incubator (37 &#176;C and CO2 5%).</li>
	<li>Fill each well with 3 mL of cell culture medium 1 (Figure 1D) and return the scaffolds to a cell culture incubator (37 &#176;C and CO2 5%) for overnight incubation. Use cell culture medium 2 if ECs are used in the scaffolds.</li>
	<li>Thaw CB-MNCs and isolate CD34+ cells from them following an appropriate CD34+ section kit protocol. Suspend the selected CD34+ cells in medium 3 and count them in a Neubauer chamber. 
	NOTE: Here, cells were used at a concentration of 2 x 106 cells per mL.
	<ol>
		<li>If AML patient-derived primary samples are used, thaw the cells, dilute them 1:10 in FBS, centrifuge them for 5 min at 300 x g, resuspend the cells in PBS-2% FBS, add anti-human CD3 antibody (2 - 4 &#181;g per 106 cells), and incubate at room temperature for 30 min. Centrifuge for 5 min at 300 x g and resuspend in hematopoietic cell medium supplemented with cytokines (20 ng/mL granulocyte-colony stimulating factor (G-CSF), 20 ng/mL IL-3, and 20 ng/mL thrombopoietin (TPO)).</li>
	</ol>
	</li>
	<li>Repeat steps 1.7 - 1.9 but in this case seed 1 x 105 human hematopoietic cells instead of stromal components, as above.
	<ol>
		<li>Fill the well with 3 mL of cell culture medium 3 (Figure 1D) and return the scaffolds to a cell culture incubator (37 &#176;C and CO2 5%) for overnight incubation. Use a 1:1 mix of cell culture media 2 and 3 If ECs are used in the scaffolds.</li>
	</ol>
	</li>
	<li>For only recombinant human bone morphogenetic protein-2 (rhBMP-2) carrier scaffolds, gently put the scaffolds one by one on a sterile tissue to remove excess PBS. Transfer the scaffolds to one well of a u-bottom, 96-well plate (Figure 1E) and add 5 &#181;L of rhBMP-2, thoroughly covering the scaffold.
	<ol>
		<li>Add 20 &#181;L of thrombin followed by 20 &#181;L of fibrinogen, thoroughly covering the scaffold each time (Figure 1F). Repeat the procedure for each scaffold until all required scaffolds are treated and then incubate for 5 - 10 min at 37 &#176;C. Check if coagulation has successfully formed.</li>
	</ol>
	</li>
</ol>
2. Surgical Implantation of Bioengineered Scaffolds
NOTE: Here, either male or female, 6- to 12-week-old NSG mice were used. As the animals are immunodeficient, all procedures should be done in sterile conditions. Steps 2.10 - 2.13 are related to survival strategies and post-surgical care.
<ol>
	<li>60 - 120 min before surgery, subcutaneously administer pain medication (carprofen, 5 mg/kg bodyweight/mouse).</li>
	<li>Induce anesthesia in a chamber with 0.5% isoflurane and 2 L/min O2. &#160;Mice should be monitored continuously during the procedure. Transfer the animal to the surgical area in prone position in order to have easy access to the back. Keep the animal under anesthesia using a nose cone supplying 1.5% isoflurane and 2 L/min O2. Keep the mouse under anesthesia during the surgical procedure and frequently check the animal state.</li>
	<li>While it is under anesthesia, use ophthalmic gel on the eyes of the mouse to prevent dryness, and keep the mouse at 37 &#176;C.</li>
	<li>Shave the surgical area on the back of the mouse using an electric trimmer. To sterilize the skin, dip a cotton tip in diluted clorexidine (diluted 1:10 in PBS) and use this tip to clean the skin surface. Repeat this procedure twice.</li>
	<li>Using sterile forceps and a scalpel (or scissors), make a 0.5- to 0.7-cm anterior-to-posterior full incision of the skin. Use the forceps inserted under the subcutaneous tissue to make a pocket.</li>
	<li>Insert the scaffold subcutaneously, making sure that it is placed deep within the pocket (Figure 1G and H). Close the incision with surgical glue (Figure 1I and J).</li>
	<li>To treat post-surgical pain, subcutaneously administer buprenorphine (0.1 mg/kg&#160;bodyweight).</li>
	<li>During recovery, place the animal on its side in a pre-warmed cage and monitor recovery until normal behavior is observed.</li>
	<li>Dilute pain medication in water (carprofen, 0.1 mg/mL of water) and provide it to animals as drinking water for 4 days after surgery.</li>
	<li>Check the animal and the wound frequently during the 48-h post-surgery period for possible adverse effects.</li>
</ol>
3. Mouse Treatments, Euthanasia, and Sample Retrieval for Imaging
NOTE: Analysis of the scaffolds is performed between 8 and 24 weeks post-implantation.
<ol>
	<li>60 min before imaging, keep the implanted mouse warm in a heating box at 37 &#176;C and intravenously administer 100 &#181;L of human immunoglobulin to block unspecific sites.</li>
	<li>30 min before imaging, intravenously administer 10 &#181;g (per mouse) of specific antibodies to label the cells of interest.</li>
	<li>5 min before imaging, intravenously administer 15 &#181;L (diluted in 100 &#181;L of PBS) of 655-nm fluorophore-labeled, vessel-pooling agent (655-VPA) to visualize vascular structures.</li>
	<li>Euthanize the mouse via cervical dislocation.</li>
	<li>Using sharp scissors, make a longitudinal skin incision on the back of the mouse, near the original implantation site.</li>
	<li>With the help of tweezers and scissors, carefully separate the skin from the subcutaneous pocket where the scaffold has been implanted.</li>
	<li>Hold the scaffold with tweezers and gently explant it from the skin by cutting the residual membrane and tissue surrounding the scaffold using scissors. See examples of scaffolds to be recovered in Figure 2.</li>
	<li>Secure the scaffold with fast-acting adhesive glue to an imaging plate (a 35 mm x 10 mm Petri dish) and fill with saline solution (PBS) at room temperature.</li>
	<li>For BMP scaffolds, before filling the plate with PBS, use a surgical microdrill to thin the bone surface under a microsurgical microscope; this allows fluorophore visualization and high-resolution image capture. Use either the 1.2- or 1.6-mm burrs, depending upon the size of the scaffold. 
	NOTE: The user will realize how much to drill depending upon the thickness of the bone. In general, as the BMP scaffolds are vascularized, the bone will slightly change color and become more red when approaching the correct thickness for imaging.</li>
	<li>Insert the plate onto the stage of the confocal microscope.</li>
</ol>
4. Live-imaging Using Two-photon Microscopy
NOTE: When using non-descanned detectors (NDD), always use the NDD slider for imaging to direct the fluorescence to the NDD. The microscope configuration is provided in Figure 3.
<ol>
	<li>Switch on the microscope and the computer, start the software by clicking &#34;Start System,&#34; and go to the &#34;Acquisition&#34; mode.</li>
	<li>Tick the &#34;Show manual tools&#34; box. In the &#34;Laser&#34; menu switch &#34;on&#34; the two-photon laser and allow it to warm up and stabilize.</li>
	<li>In the &#34;Imaging Setup&#34; menu, simultaneously activate &#34;Channel Mode&#34; and &#34;Switch track every Frame.&#34; In the &#34;Light Path&#34; menu, select &#34;Non Descanned&#39;&#34; and &#34;Main Beam Splitter MBS 760+.&#34; Tick to activate the four NDDs and set the configuration as illustrated in Figure 3. 
	NOTE: With this configuration, the collagen signal from bone structures (second harmonic generation, SHG) is collected at 380 - 485 nm, FITC-hCD31+ human endothelial cells and AF488- hCD45+ human hematopoietic cells at 500-550 nm, and 655-VPA at 640 - 690 nm.</li>
	<li>In the &#34;Channels&#34; menu, set the &#34;laser wavelength&#34; to 890 nm and the power to 50%. Set the &#34;Gain (Master)&#34; to 500-600, the &#34;Digital Offset&#34; to 0, and the &#34;Digital Gain&#34; to 15 for each channel. Adjust these values once the acquisition has started.</li>
	<li>In &#34;Acquisition Mode,&#34; set up the required parameters to obtain high-resolution images without damaging the tissue and bleaching the fluorophores. Set &#34;Scan Mode&#34; to &#34;Frame,&#34; &#34;Frame Size&#34; to &#34;x512 y512,&#34; Line Step&#34; to 1, &#34;Speed&#34; to 9, &#34;Averaging number&#34; to 8, &#34;Bit Depth&#34; to &#34;8 Bit,&#34; &#34;Mode&#34; to &#34;line,&#34; &#34;Direction&#34; to &#34;bidirectional,&#34; and &#34;Method&#34; to &#34;mean.&#34;
	<ol>
		<li>Set the &#34;Zoom&#34; to 1 for the initial scan of the image, and increase it if required to focus on particular areas.</li>
	</ol>
	</li>
	<li>Place the plate containing the scaffold on the microscope stage under the 20X, 1.0 NA water-immersion lens and lower the lens until it touches the saline solution. Set the focus of the lens on the scaffold using the microscope eyepieces, using a lamp as the light source.</li>
	<li>Activate the &#34;Z-stack&#34; menu, select the &#34;First/Last&#34; function, and set the required interval between two sub-sequential slices (e.g., 2-&#181;m Z-stack). Keep the intervals constant within the Z-stack.</li>
	<li>Select &#34;Live&#34; to image a live scan of the sample and adjust the &#34;Digital Gain&#34; and &#34;Digital Offset&#34; for optimal exposure. To visualize multiple channels at the same time, select the &#34;Split&#34; function.</li>
	<li>In the &#34;Stage&#34; menu, while in &#34;Live&#34; mode, scan the image and &#34;Mark&#34; regions of interest (ROI), such as the location of human hematopoietic cells and vascular structures. When the scan of the sample is complete, move to the first ROI to start imaging.</li>
	<li>In &#34;Live&#34; mode, set the top and bottom of the 3D Z-stack surrounding the area of interest using the &#34;Set first&#34; and &#34;Set last&#34; functions. Once finished, set the center, &#34;C.&#34; Start the acquisition of the ROI with the &#34;start experiment&#34; button. See examples of images in Figure 4, Figure 5, and Figure 6.</li>
	<li>Once acquisition is complete, save the image in the designated folder. Move to the next ROI and repeat step 4.10. Once the experiment is complete, remove the imaging plate from the microscope, carefully detach the sample from the plate, and clean any residual glue.</li>
	<li>Prepare the sample for the next analysis technique.</li>
</ol>
5. Sample Processing for Histology and Immunostaining
NOTE: Samples are processed according to the protocol described in the JoVE general laboratory techniques54 describing sample fixation, embedding, and sectioning processes. Bone-forming samples should be treated for 7 days in an EDTA-based decalcifying agent between the fixation and embedding processes. The blocking/permeabilization solution is 10 mM PBS pH 7.4 buffer with 1% Triton X-100, 1% bovine serum albumin (BSA), and 10% normal goat serum (NGS).
<ol>
	<li>Put the slices in xylene for 10 min), xylene for 5 min, 100% ethanol for 5 min, 70% ethanol for 5 min, 50% ethanol for 5 min, and H2O for 5 min.</li>
	<li>Transfer the slices to a citrate-based antigen unmasking working solution.</li>
	<li>Boil the slices for 15 min and allow them to cool to room temperature.</li>
	<li>Wash the slices in 10 mM PBS pH 7.4 solution with 1% Triton X-100 (5 min, 3 times).</li>
	<li>Transfer the samples to the blocking/permeabilization solution and incubate for 30 min.</li>
	<li>Add primary antibody diluted in blocking/permeabilization solution and incubate overnight at 4 &#176;C.</li>
	<li>Wash the slices in 10 mM PBS pH 7.4 solution with 1% Triton X-100 (5 min, 3 times).</li>
	<li>Add secondary antibody diluted in blocking/permeabilization solution for 1 h in the dark at room temperature.</li>
	<li>Wash with H2O (5 min, 3 times).</li>
	<li>To reduce background fluorescence, immerse the slices in Sudan Black working solution for 10 min, in the dark and at room temperature.</li>
	<li>Wash the slices in H2O (5 min, 3 times).</li>
	<li>Mount the slices using fluorescent mounting medium with DAPI (0.5 &#181;g/mL).</li>
	<li>Store the slices at 4 &#176;C and check that the mounting medium is dry before conducting fluorescent imaging. See example images in Figure 7.</li>
</ol>

The authors have nothing to disclose.

Significance with Respect to Existing Methods:
In this protocol, we described a method to generate different humanized microenvironments in mice and to visualize their architecture via two-photon microscopy and histology. The representative data provided shows the feasibility of the approach, using different stromal cells to engineer humanized tissues. The protocol has specific applications to the study of human hematopoietic cells and bone marrow niche-derived cells in normal and pathological conditions. These applications include the study of clonal evolution, drug screening, and crosstalk between human HSCs and stromal components. In the emerging field of tissue engineering, several alternative approaches have been proposed. Approaches of note include the development of 3D humanized BM structures in vitro55,56,57,58,59,60,61,62,63 and the orthotopic graft of humanized BM scaffolds in mice64. Our approach has the advantage of combining both the complexity of the in vivo system with the easy anatomical accessibility of the humanized tissue graft.
Modifications and Troubleshooting:
A source of variability in this protocol can be found in the selection of cells used to seed the scaffolds. In our work, we used BM-derived hMSCs. However, mesenchymal cells can be obtained from several tissues, which may show distinctive properties depending upon the origin. Therefore, the use of hMSCs derived from different organs can be considered. However, their ability to form bone tissue in vivo should be tested prior to use in this protocol.This protocol uses a commercially available human endothelial cell source (i.e., E4ORF1-transduced HUVEC). Recently, the use of organ-specific endothelial cells for different purposes has been reported65,66. Furthermore, the use of primary hECs derived from the BM could represent an interesting improvement to the protocol. Therefore, the use of different sources of endothelial cells may produce different in vivo outcomes.
We used NSG immunocompromised recipient mice to favor the implantation of humanized scaffolds and to avoid tissue rejection. We do not exclude the possibility of using this protocol to engineer ectopic bone marrow tissues in other mouse strains. Indeed, rhBMP-2 can induce bone formation in different mammalian models47,48,49,50,52. However, differences in cell viability and long-term transplantation are likely to be observed using different strains/models.
The timing of scaffold recovery can also be flexible, depending upon the final purpose of the experiment. In the presented protocol, we recover samples at 8 - 12 weeks after implantation to assess long-term hematopoietic engraftment. To study early steps of the human BM niche formation (e.g., osteochondral tissue formation47 or vascular development), different time points can be chosen.
The live-imaging technique we described in this protocol is indicated for short-term imaging of explants. The use of an equilibrated chamber for maintaining physiological temperature, oxygen tension, and CO2 concentration should be considered in cases of long-term imaging, such as to study motility behaviors.
Critical Steps within the Protocol:
Among the challenges related to the protocol, we would highlight the technical skills required for some steps. Mesenchymal and endothelial cells should be used at low cell passage numbers; otherwise, they will not be able to support human hematopoietic cell engraftment in vivo or to participate in de novo vasculature and bone formation in vivo. We recommend the use of hMSCs and hECs at passages 1 - 5. Scaffold preparation and cell-seeding steps require basic cell-culture skills and knowledge of the properties of the specific cells used in the procedure. The surgery protocol is quite straightforward but requires some practice. Maintenance of an aseptic environment to avoid contamination of the implanted scaffolds in immunodeficient mice is crucial to ensure the success of the experiment. Sample explant and live imaging require surgical practice (especially for the use of the microdrill) and knowledge of the microscope system. Finally, sample processing and histology require basic knowledge of the techniques to be used.
Limitations of the Technique:
The approach we describe allows for the visualization of live human hematopoietic cells seeding a humanized bone marrow microenvironment, with human endothelial cells forming vascular structures and mesenchymal cells forming bone/bone marrow space. As the tissue is formed in vivo, the final engineered scaffold will still be chimeric (human and murine). This issue should be taken into account, as the chimeric tissue may not fully mimic human bone marrow complexity and environment.
The scaffolds implanted have a limited size (we tried a maximum of 6.6 x 7.5 x 7 mm), and therefore, they are able to host a limited number of cells for xenotransplantation. The absolute number of recovered cells will also be limited; thus, the number of implanted scaffolds should be calculated as a function of the number of cells required for the experiment.
The imaging application we described is particularly useful for observing large areas of live tissue at depths of 150-200 &#181;m from the surface without disrupting the architecture and damaging the cells. Therefore, it does not allow for the visualization of the whole scaffold. If a complete scan of the tissue is required, standard immunofluorescence approaches would be more appropriate.
Future Applications:
The future direction of this bioengineered model would be to increase the complexity of the human components in the tissue. The knowledge and characterization of the human BM niche has progressed in recent years67, and the described protocol could be an interesting platform to study the function of these new cellular components and soluble factors, as well as their role in supporting normal/malignant HSCs.
Furthermore, the imaging technique provides the potential for intravital imaging of the scaffolds in longitudinal studies, which would require technical improvements in imaging the scaffolds in live, anesthetized mice, with post-surgery recovery. This approach would require additional steps and is currently under investigation in the laboratory.

Cell fate decisions observed in stem cell compartments are tightly regulated by both intrinsic and extrinsic factors. In particular, it is now widely recognized that the BM microenvironment plays a fundamental role in controlling the switch in HSCs from a quiescent to an active state, as well as in their self-renewal or differentiation fate decision1. Moreover, recent findings indicate that hematological malignancies affect the function of the BM microenvironment, pointing to the existence of active crosstalk between the two compartments2,3,4,5,6. Despite recent advances, many key questions remain about how the activity of specific BM-niche components contribute to HSC behavior and malignant transformation.
The BM microenvironment is a highly heterogeneous and complex mixture of many different cell types, each with specialized functions. The abundant endothelial (EC) and vascular component regulate nutrient and metabolite turnover, the ingress and egress of different cells to and from the BM, and several HSC functions7,8. Mesenchymal stromal cells (MSCs), a heterogeneous population of undifferentiated stem cells and progenitors committed through three different lineages (i.e., osteogenic, chondrogenic, an adipogenic), are another fundamental component of the BM niche. These MSCs localize both in central areas of the BM and in the proximity to the endosteal region. They may be associated with vascular structures and are implicated in the regulation of HSC function9,10,11,12,13,14,15.
Many reports suggest that HSCs reside in various defined sites within the marrow and that their function might depend upon their precise localization. Most of the present knowledge regarding HSCs and their interaction with the BM microenvironment derives from murine studies1. The use of xenograft models has extended this knowledge to human normal and malignant HSCs, engrafting within the murine BM of immunodeficient mice16,17,18,19,20. Although this represents a valid model, it still presents many challenges, such as the need to condition the recipient mouse in most cases to allow for human HSC homing and engraftment or the cross-species barrier and its poorly understood influence on cell-cell interactions and functions.
The use of neutralizing antibodies and genetically modified mice, along with xenotransplantation, has been instrumental in highlighting the complex dialog that human HSCs establish with their microenvironments. The introduction and development of intravital two-photon confocal microscopy has moved these studies a step forward, allowing for the direct, high-resolution, and dynamic imaging of the bone marrow19,20,21,22 and provides a powerful tool for the functional characterization of the BM microenvironment and its role in regulating HSC function. In order to circumvent some of the problems arising in classical xenotransplantation models, the concept of engineering a humanized BM structure has been brought to the fore. Merging biomaterials and cell-implantation concepts, reports have shown the feasibility of mimicking the human bone marrow microenvironment in heterotopic regions23,24,25,26,27. This opens the possibility of using bioengineering in mouse models to study human normal and malignant hematopoiesis28,29,30,31,32,33,34,35,36,37,38,39, tumorigenesis, and metastasis40,41,42,43,44.
Based on previous experience in bone tissue engineering and in vivo imaging19,22,45,46,47,48,49,50,51,52, we describe a protocol to bioengineer and live-image organotypic human BM tissues. These structures originate from the implantation of human BM-derived stromal cells into collagen-based scaffolds subcutaneously grafted in immunodeficient mice. In a previous report, we demonstrated that human MSCs ensure the formation of a human microenvironment adequate for the engraftment of human hematopoietic cells45. Furthermore, here we describe how the co-implantation of other human BM cellular components, such as human endothelial cells (hEC), and/or cytokines important for bone formation (e.g., hBMP2), cooperate with hMSCs to generate different humanized microenvironments, which can be live-imaged in situ.

<table><tbody><tr><td>Ficoll-Paque</td><td>Ge Healthcare</td><td>17-1440-03</td><td></td></tr><tr><td>Cd34 positive selection Kit</td><td>Stemcell</td><td>18056</td><td>Store a 4&amp;deg;C.</td></tr><tr><td>Magnet</td><td>Stemcell</td><td>18000</td><td></td></tr><tr><td>Anti-human CD3 antibody, clone OKT-3</td><td>Bioxcell</td><td>BE0001-2</td><td>Store at 4&amp;deg;C. Used for T cell depletion in primary AML samples.&amp;nbsp;</td></tr><tr><td>Cytokines (IL3, G-CSF, and TPO)</td><td>PeproTech</td><td>200-03, 300-23 and 300-18</td><td>For doing the stock: Dilute each one of the cytokines in 100 &amp;mu;L of water and mix them. Add 200 &amp;mu;L, do alicuots of 45 &amp;mu;L and Store at -20 &amp;deg;C.</td></tr><tr><td>DMSO</td><td>Sigma</td><td>D4540</td><td></td></tr><tr><td>FBS</td><td>Life technologies</td><td>10270106</td><td>Heat-inactivate at 56 &amp;deg;C during 30 min, do aliquots and freeze down. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>MEM-&amp;alpha;</td><td>Invitrogen</td><td>32571-028</td><td>Store at 4 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>Myelocult H5100</td><td>corning</td><td>5100</td><td>Store at 4 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>199</td><td>Gibco</td><td>41150-020</td><td>Store at 4 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>hMSC-FBS, Heat-inactivated</td><td>Gibco</td><td>12662-029</td><td>Store at -20 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>P/S</td><td>Sigma-Aldrich</td><td>P0781</td><td>Store at -20 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>ECGS</td><td>Millipore</td><td>02-102</td><td>Dilute in culture media and use 0.22 mm filter.</td></tr><tr><td>HEPES</td><td>Sigma-Aldrich</td><td>S1558-50ML</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Heparin</td><td>Sigma-Aldrich</td><td>H3149</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Glutamine</td><td>Gibco</td><td>25030</td><td>Store at -20 &amp;deg;C.</td></tr><tr><td>Collagen 1 coated cell culture plate</td><td>corning</td><td>354505</td><td></td></tr><tr><td>Trypsin-EDTA solution</td><td>Thermo-Fisher</td><td>25200056</td><td>Store at -20 &amp;deg;C. Warm in 37 &amp;deg;C water bath before use.</td></tr><tr><td>hMSC</td><td>Lonza</td><td>PT-2501</td><td>Alternatively, hMSCs we also kindly provided by Dr. Dosquet (University Paris Diderot, Paris) from human bone marrow obtained during orthopaedic surgery under ethical approval 10-038 from IRB00006477.&amp;nbsp;</td></tr><tr><td>VeraVec HUVEC endothelial cells</td><td>Angiocrine bioscience</td><td>hVera101</td><td>Alternatively, other human endothelial cell source may be used.</td></tr><tr><td>Human hematopoietic cells</td><td></td><td></td><td>Umbilical Cord blood or primary Acute Myeloid Leukemia (AML) samples were obtained from the Royal London Hospital (London, UK) after informed consent and protocol of use was approved by the East London Ethical Committee and carried out in accordance with the Declaration of Helsinki.&amp;nbsp;</td></tr><tr><td>Gelfoam, Size 12 - 7mm</td><td>Pfizer</td><td>00009-0315-08</td><td>Alternative supplier: Febelco</td></tr><tr><td>PBS</td><td>Thermo-Fisher</td><td>10010023</td><td></td></tr><tr><td>Surgical material</td><td>Multiple</td><td></td><td>Sterile forceps, tweezers and sharp scissors.</td></tr><tr><td>Sterile tissues</td><td></td><td></td><td>Heat-sterilize paper tissues.</td></tr><tr><td>1 mL Syringe with needle of 25G</td><td>Terumo</td><td>SS+01H25161</td><td></td></tr><tr><td>Ultra Low Attachment Multiple Well Plates</td><td>Corning</td><td>3473 or 3471</td><td></td></tr><tr><td>BMP2</td><td>Noricum</td><td>rhBMP-2</td><td>Dilute at 5 mg/mL in acetic acid 50 mM and store at 4 &amp;deg;C.</td></tr><tr><td>Thrombin</td><td>Sigma</td><td>T8885</td><td>Dilute in CaCl&lt;sub&gt;2&lt;/sub&gt; 2%, 500 mL per vial, and store at 4 &amp;deg;C.</td></tr><tr><td>Fibrinogen</td><td>Sigma</td><td>F3879</td><td>Dilute at 4 mg/100 mL in PBS. Store at -20 &amp;deg;C. Warm before use.</td></tr><tr><td>Tissue-culture dishes 35 mm x 10 mm</td><td>Falcon</td><td>353001</td><td></td></tr><tr><td>U-Botton 96 well plate</td><td>Falcon</td><td>353077</td><td></td></tr><tr><td>NSG mice</td><td>The Jackson Laboratory</td><td>5557</td><td>NSG mice were a kind gift from Dr Leonard Shultz (The Jackson Laboratory).</td></tr><tr><td>Chlorhexidine</td><td>G9</td><td></td><td>Dilute 1:10 before use</td></tr><tr><td>Carprofen</td><td>Pfizer</td><td>Rimadyl</td><td>5 mg/kg of mouse</td></tr><tr><td>Buprenorphine</td><td>Alstoe</td><td>Vetergesic</td><td>0.1 mg/kg of mouse body weight</td></tr><tr><td>Isoflurane</td><td>Abbott</td><td>B506</td><td>Induction of anaesthesia 2%, maintenance 1%</td></tr><tr><td>Trimmer</td><td>Wella</td><td>Contura HS61</td><td></td></tr><tr><td>Surgical glue</td><td>3M</td><td>Vetbond</td><td></td></tr><tr><td>carbomer (polyacrylic acid) as Ophthalmic gel</td><td>Novartis</td><td>Viscotears Liquid Gel</td><td></td></tr><tr><td>Human Normal Immunoglobulin</td><td>Gammaplex</td><td>10g vial</td><td>100 mL/mouse intravenously, 30 min before infusion of specific antibody.</td></tr><tr><td>NT-QTracker</td><td>Invitrogen</td><td>Q21021MP</td><td>Vessel-pooling agent. Administrate 15 mL/mouse intravenously 5 min before imaging.</td></tr><tr><td>AF488-hCD45</td><td>Biolegend</td><td>304017</td><td>100 mL/mouse intravenously, 30 min before imaging.</td></tr><tr><td>FITC-hCD31</td><td>BD Pharmigen</td><td>555445</td><td>100 mL/mouse intravenously, 30 min before imaging.</td></tr><tr><td>Super glue</td><td>Loctite</td><td>Super Glue</td><td></td></tr><tr><td>Micro-Drill Kit</td><td>IDEAL - Fisher Scientific</td><td>NC9010016</td><td></td></tr><tr><td>Microsurgical microscope</td><td></td><td></td><td>No specific brand/company is adviced.</td></tr><tr><td>LSM 710 NLO</td><td>Zeiss</td><td></td><td>Upright confocal microscope with motorized stage, two-photon laser and 20X 1.0 NA water immersion lens. Alternatively, a microscope with similar specifications could be used.</td></tr><tr><td>MaiTai &amp;ldquo;High Performance&amp;rdquo; fully automated 1-box 517 mode-locked Ti:Sapphire laser with DeepSee dispersion compensation</td><td>Spectra-Physics</td><td></td><td></td></tr><tr><td>Formalin solution, neutral buffered, 10%&amp;nbsp;</td><td>Sigma-Aldrich</td><td>HT501128</td><td></td></tr><tr><td>Ethanol</td><td>Sigma-Aldrich</td><td>32294</td><td></td></tr><tr><td>Osteosoft</td><td>Millipore</td><td>1.01728.1000</td><td></td></tr><tr><td>Polysine slices</td><td>Thermo scientific</td><td>J2800AMNZ</td><td></td></tr><tr><td>Antigen unmasking solution</td><td>Vector</td><td>H-3300</td><td>Store at 4 &amp;deg;C. Dilute 1:100 in H&lt;sub&gt;2&lt;/sub&gt;O for working solution.</td></tr><tr><td>Triton 100x</td><td>Sigma-Aldrich</td><td>T9284</td><td></td></tr><tr><td>Bovine serum albumin (BSA)</td><td>Sigma-Aldrich</td><td>A96470</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Normal Goat serum (NGS)</td><td>Sigma-Aldrich</td><td>G9023</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Endomucin Antibody</td><td>Santa Cruz</td><td>sc-65495</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>hVimentin antibody</td><td>Santa Cruz</td><td>sc-6260</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>hCD31 antibody</td><td>DAKO</td><td>M0823</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>hCD45 antibody</td><td>DAKO</td><td>M0701</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>ADRP (Perilipin2)</td><td>antibodies-online</td><td>ABIN283918</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Goat anti mouse secondary antibodies</td><td>Invitrogen</td><td>A11029 or A11005</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Goat anti Rabbit secondary antibodies</td><td>Invitrogen</td><td>A11037 or A11008</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Goat anti Rat secondary antibodies</td><td>Invitrogen</td><td>A11007 or A21247</td><td>Store at 4 &amp;deg;C.</td></tr><tr><td>Sudan Black</td><td>Sigma</td><td>S2380</td><td>Prepare a stock of 1% sudan black in ethanol 70%. Store at RT. Prepare working solution of 0.1% sudan black in ethanol 70% and filter using filter-paper before use.</td></tr><tr><td>DAPI</td><td>Sigma</td><td>D8417</td><td>Prepare stock in H&lt;sub&gt;2&lt;/sub&gt;0 at 100 mg/mg. Store at 4 &amp;deg;C.</td></tr><tr><td>Fluorescent mounting media</td><td>Dako</td><td>S3023</td><td>Add DAPI before use (1:400 from DAPI stock).</td></tr><tr><td>Cover glass</td><td>VWR</td><td>631-0147</td><td></td></tr></tbody></table>

bioengineering of humanized bone marrow microenvironments in mouse and their visualization by live imaging

Human hematopoietic stem cells (HSCs) reside in the bone marrow (BM) niche, an intricate, multifactorial network of components producing cytokines, growth factors, and extracellular matrix. The ability of HSCs to remain quiescent, self-renew or differentiate, and acquire mutations and become malignant depends upon the complex interactions they establish with different stromal components. To observe the crosstalk between human HSCs and the human BM niche in physiological and pathological conditions, we designed a protocol to ectopically model and image a humanized BM niche in immunodeficient mice. We show that the use of different cellular components allows for the formation of humanized structures and the opportunity to sustain long-term human hematopoietic engraftment. Using two-photon microscopy, we can live-image these structures in situ at the single-cell resolution, providing a powerful new tool for the functional characterization of the human BM microenvironment and its role in regulating normal and malignant hematopoiesis.

In Figure 1, representative images of the scaffold cell seeding and implantation processes are shown. In Figure 1C, note that cells are injected directly into the scaffold. In Figure 1G, note that an incision is made in the back of the mouse, where the subcutaneous pocket is created and the scaffold is implanted. Figure 2 shows the gross morphology of different scaffolds implanted in NSG mice and retrieved after 8 weeks. Note the slight vascularization in hMSC seeded scaffolds (Figure 2A). The co-seeding of human ECs with hMSCs in the scaffold allows for the formation of more relevant vasculature in scaffolds (Figure 2B). Finally, the presence of rhBMP-2 induces bone formation. The retrieved scaffolds are bigger in this case, and they are constituted by bone-resembling hard tissue.
Figure 3 shows the channel configuration setup on the microscope for live-imaging with NDD (details in the figure legend). Figure 4 and Video 1 show human hematopoietic cells in hMSC-coated scaffolds. Scaffolds were explanted 8 weeks post-implantation and after the intravenous inoculation of AF488-hCD45 antibody and 655-VPA. This procedure allows for the visualization of implanted human hematopoietic cells and the vascular structure by two-photon confocal microscopy. In this case, the images show blood vessels (655-VPA) in scaffolds and the long-term engraftment of human hematopoietic cells (AF488-hCD45) in the scaffold parenchyma. Figure 5 and Video 2 correspond to human scaffolds seeded with hECs and hMSCs. 8 weeks after surgery, scaffolds were explanted after the intravenous inoculation of FITC-hCD31 antibody and 655-VPA, and images were acquired with a two-photon confocal microscope, as mentioned before. Images show the participation of hECs in vessel formation in the scaffold, resulting in a murine-human chimeric vasculature.
Figure 6A shows representative data of the approach used to stimulate bone formation in MSC scaffolds. Similar to previous figures, 8 weeks after implantation, the intravenous inoculation of 655-VPA was performed, scaffolds were retrieved, and images were acquired with two-photon confocal microscopy. rhBMP-2-stimulated scaffolds induce the formation of bone tissue, which could be visualized due to the SHG (cyan color in the images) provided by the calcium in the bone. The provided images also show the formation of cavities and vascularized endosteal tissue, which highly resemble the BM endosteal tissue. In Figure 6B and Video 3, hECs were co-implanted with hMSCs. Scaffolds were retrieved after the intravenous inoculation of FITC-hCD31 antibody and 655-VPA, and two-photon confocal microscopy images show the participation of hECs in the neovascularization in a bone-forming scaffold.
Figure 7 shows representative images of histology, a procedure performed to corroborate previously described results. Immunofluorescent images show mouse vasculature, hECs, hMSCs, and long-term engrafted human hematopoietic cells in the scaffold structures. Scaffolds retrieved from mice were fixed and used for immunofluorescence. In the rhBMP-2 carrier bone-forming scaffolds (Figure 7D-F), note the morphology of the tissue, resembling mature bone marrow with adipose tissue. In this bone-forming scaffold, we show that hMSCs are fibroblasts, which would indicate that they contribute to newly formed tissue as stromal cells. We also show human adipocyte marker expression, which would indicate that hMSCs also contribute to adipose tissue formation.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/55914/55914fig1.jpg" /> 
Figure 1. Representative Images of the Cell-seeding and Implantation Processes. A) Initial scaffold and its cutting method using a scalpel. B) 24 pieces obtained from the initial scaffold. C) Scaffold cell-seeding method using a syringe. D) Cell-seeded scaffolds with culture medium, ready to be implanted. E-F) Specific steps for bone-forming scaffolds: E) scaffold being transferred to a 96-well, u-bottom plate and F) representative image of the method used to add rhBMP2, thrombin, and fibrinogen to the scaffold. G-J) Surgical implantation procedure under general anesthesia: G) wound created in the skin and scaffold implantation, H) implantation method, and I-J) wound closing procedure using surgical glue. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/55914/55914fig2.jpg" /> 
Figure 2. Different Scaffolds Retrieved from Mice. Representative images of MSC scaffolds (left), MSC+EC scaffolds (middle), and MSC+EC+BMP scaffolds (right). <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/55914/55914fig3.jpg" /> 
Figure 3. Channel Configuration. The microscope filter setup is shown. A) There are four NDD detector modules: in the first module, there are two filter cubes; the second and third modules have one filter cube each; and the last module has no cube (not used). The first photomultiplier tube (PMT) is for the far-red channel (640 - 690 nm), reflecting the lower wavelengths; the following ones are 380 - 485 nm, 500 - 550 nm, and 555 - 625 nm (the order is always from the lower to higher wavelengths). B) The fluorophore emissions detectable with the above configurations (color coded). <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/55914/55914fig4.jpg" /> 
Figure 4. MSC Scaffolds Allow for the Formation of a Niche for Human Hematopoietic Cells. A) and B) 3D reconstructions of Z-stacks taken post-explant, after intravenous inoculation with AF488-hCD45 (green), to label human hematopoietic cells, and 655-VPA (magenta)m to label vasculature. Scale bars represent 20 &#181;m in A and B (upper panels) and 5 &#181;m in B (lower panels). <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig4large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Video 1" src="/files/ftp_upload/55914/55914video1.jpg" /> 
Video 1. MSC Scaffolds Allow for the Formation of a Niche for Human Hematopoietic Cells. 3D reconstruction of human hematopoietic cells (AF488-hCD45) associated with the vasculature (655-VPA) in the MSC scaffold (collagen structures: SHG, cyan). Each stack measures 140 x 140 &#181;m. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914video1.mov" target="_blank">Please click here to view this video. (Right-click to download.)</a>
<img alt="Figure 5" class="xfigimg" src="/files/ftp_upload/55914/55914fig5.jpg" /> 
Figure 5. Human ECs Participate in the Formation of Humanized Vessels in MSC Scaffolds. 3D reconstruction of vasculature (655-VPA) lined by ECs of human origin (FITC-hCD31) in MSC+EC scaffolds. Scale bars represent 20 &#181;m. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig5large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Video 2" src="/files/ftp_upload/55914/55914video2.jpg" /> 
Video 2. Human ECs Participate in the Formation of Humanized Vessels in MSC Scaffolds. 3D reconstruction of human ECs (FITC-hCD31) lining the vasculature (655-VPA) in MSC+EC scaffolds. Each stack measures 240 x 240 &#181;m. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914video2.mov" target="_blank">Please click here to view this video. (Right-click to download.)</a>
<img alt="Figure 6" class="xfigimg" src="/files/ftp_upload/55914/55914fig6.jpg" /> 
Figure 6. rhBMP-2 Carrier Scaffolds have Bone Surfaces and Humanized Vasculature Similar to the Bone Marrow. A) 3D reconstruction of MSC+BMP scaffolds showing the formation of bone structures (SHG-cyan) and vasculature (655-VPA). Scale bars represent 100 &#181;m (left), 70 &#181;m (middle), and 50 &#181;m (right). B) 3D reconstruction of MSC+EC+BMP scaffolds showing humanized vessels (655-VPA) lined with human ECs (FITC-hCD31). Scale bars represent 50 &#181;m (left) and 30 &#181;m (middle and right). <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig6large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Video 3" src="/files/ftp_upload/55914/55914video3.jpg" /> 
Video 3. rhBMP-2 Carrier Scaffolds have Bone Surfaces and Humanized Vasculature Similar to the Bone Marrow. 3D reconstruction of MSC+VERA+BMP scaffold (bone: SHG; vessels: 655-VPA; human ECs: FITC-hCD31). Each stack measures 600 x 600 &#181;m. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914video3.mov" target="_blank">Please click here to view this video. (Right-click to download.)</a>
<img alt="Figure 7" class="xfigimg" src="/files/ftp_upload/55914/55914fig7.jpg" /> 
Figure 7. Representative Images of Immunofluorescence Performed on Fixed Scaffolds. A-F) Immunofluorescence studies performed to locate human cells implanted in scaffolds. A-C) Scaffolds implanted with hECs, hMSCs, and hHSCs. D-F) Bone-forming scaffolds implanted with hECs, hMSCs, and hHSCs. The color channels are as follows: A-D) human EC (hCD31) and mouse vascular structure (endomucin, ENDOM), B-E) hMSCs (hVimentin, hVIM) and mouse vascular cells (endomucin, ENDOM), C) human hematopoietic cells (hCD45) and mouse vasculature (endomucin, ENDOM), and F) human adipose differentiation-related protein (hADRP) and mouse vasculature (endomucin, ENDOM). Scale bars represent 10 &#181;m (A and C), 20 &#181;m (B and E), and 40 (D and F) &#181;m. <a href="https://cloudflare-jove-com.bdigitaluss.remotexs.co/files/ftp_upload/55914/55914fig7large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

Watch this Scientific Journal Video about Bioengineering of Humanized Bone Marrow Microenvironments in Mouse and Their Visualization by Live Imaging at JoVE.com

Bioengineering of Humanized Bone Marrow Microenvironments in Mouse and Their Visualization by Live Imaging

A method to create and live-image different humanized bone-marrow niches in mice is presented. Based on the supportive niche created by human mesenchymal cells, the addition of human endothelial cells induces the formation of human vessels, while the addition of rhBMP-2 induces the formation of human-mouse chimeric mature bone tissue.

Human hematopoietic stem cells (HSCs) reside in the bone marrow (BM) niche, an intricate, multifactorial network of components producing cytokines, growth ...

bioengineering-humanized-bone-marrow-microenvironments-mouse-their

Nanyang Technological University

Research

JoVE Journal

Developmental Biology

11.6K Views.  The Francis Crick Institute. A method to create and live-image different humanized bone-marrow niches in mice is presented. Based on the supportive niche created by human mesenchymal cells, the addition of human endothelial cells induces the formation of human vessels, while the addition of rhBMP-2 induces the formation of human-mouse chimeric mature bone tissue.

Video: Bioengineering of Humanized Bone Marrow Microenvironments in Mouse and Their Visualization by Live Imaging

Combining Intravital Fluorescent Microscopy (IVFM) with Genetic Models to Study Engraftment Dynamics of Hematopoietic Cells to Bone Marrow Niches

Increasing evidence indicates that normal hematopoiesis is regulated by distinct microenvironmental cues in the BM, which include specialized cellular niches modulating critical hematopoietic stem cell (HSC) functions1,2. Indeed, a more detailed picture of the hematopoietic microenvironment is now emerging, in which the endosteal and the endothelial niches form functional units for the regulation of normal HSC and their progeny3,4,5. New studies have revealed the importance of perivascular cells, adipocytes and neuronal cells in maintaining and regulating HSC function6,7,8. Furthermore, there is evidence that cells from different lineages, i.e. myeloid and lymphoid cells, home and reside in specific niches within the BM microenvironment. However, a complete mapping of the BM microenvironment and its occupants is still in progress.
Transgenic mouse strains expressing lineage specific fluorescent markers or mice genetically engineered to lack selected molecules in specific cells of the BM niche are now available. Knock-out and lineage tracking models, in combination with transplantation approaches, provide the opportunity to refine the knowledge on the role of specific &#34;niche&#34; cells for defined hematopoietic populations, such as HSC, B-cells, T-cells, myeloid cells and erythroid cells. This strategy can be further potentiated by merging the use of two-photon microscopy of the calvarium. By providing in vivo high resolution imaging and 3-D rendering of the BM calvarium, we can now determine precisely the location where specific hematopoietic subsets home in the BM and evaluate the kinetics of their expansion over time. Here, Lys-GFP transgenic mice (marking myeloid cells)9 and RBPJ knock-out mice (lacking canonical Notch signaling)10 are used in combination with IVFM to determine the engraftment of myeloid cells to a Notch defective BM microenvironment.

Combining Intravital Fluorescent Microscopy IVFM with Genetic Models to Study Engraftment Dynamics of Hematopoietic Cells to Bone Marrow Niches

Intravital fluorescence microscopy (IVFM) of the calvarium is applied in combination with genetic animal models to study the homing and engraftment of hematopoietic cells into bone marrow (BM) niches.

Increasing evidence indicates that normal hematopoiesis is regulated by distinct microenvironmental cues in the BM, which include specialized cellular ...

Live Imaging of Drug Responses in the Tumor Microenvironment in Mouse Models of Breast Cancer

The tumor microenvironment plays a pivotal role in tumor initiation, progression, metastasis, and the response to anti-cancer therapies. Three-dimensional co-culture systems are frequently used to explicate tumor-stroma interactions, including their role in drug responses. However, many of the interactions that occur in vivo in the intact microenvironment cannot be completely replicated in these in vitro settings. Thus, direct visualization of these processes in real-time has become an important tool in understanding tumor responses to therapies and identifying the interactions between cancer cells and the stroma that can influence these responses. Here we provide a method for using spinning disk confocal microscopy of live, anesthetized mice to directly observe drug distribution, cancer cell responses and changes in tumor-stroma interactions following administration of systemic therapy in breast cancer models. We describe procedures for labeling different tumor components, treatment of animals for observing therapeutic responses, and the surgical procedure for exposing tumor tissues for imaging up to 40 hours. The results obtained from this protocol are time-lapse movies, in which such processes as drug infiltration, cancer cell death and stromal cell migration can be evaluated using image analysis software.

We describe a method for imaging response to anti-cancer treatment in vivo and at single cell resolution.

The tumor microenvironment plays a pivotal role in tumor initiation, progression, metastasis, and the response to anti-cancer therapies. Three-dimensional ...

Medicine

Tracking Mouse Bone Marrow Monocytes In Vivo

Real time multiphoton imaging provides a great opportunity to study cell trafficking and cell-to-cell interactions in their physiological 3-dimensionnal environment. Biological activities of immune cells mainly rely on their motility capacities. Blood monocytes have short half-life in the bloodstream; they originate in the bone marrow and are constitutively released from it. In inflammatory condition, this process is enhanced, leading to blood monocytosis and subsequent infiltration of the peripheral inflammatory tissues. Identifying the biomechanical events controlling monocyte trafficking from the bone marrow towards the vascular network is an important step to understand monocyte physiopathological relevance. We performed in vivo time-lapse imaging by two-photon microscopy of the skull bone marrow of the Csf1r-Gal4VP16/UAS-ECFP (MacBlue) mouse. The MacBlue mouse expresses the fluorescent reporters enhanced cyan fluorescent protein (ECFP) under the control of a myeloid specific promoter 1, in combination with vascular network labelling. We describe how this approach enables the tracking of individual medullar monocytes in real time to further quantify the migratory behaviour within the bone marrow parenchyma and the vasculature, as well as cell-to-cell interactions. This approach provides novel insights into the biology of the bone marrow monocyte subsets and allows to further address how these cells can be influenced in specific pathological conditions.

Tracking Mouse Bone Marrow Monocytes In Vivo

Monocytes are key regulators of innate immunity and play a critical role in the renewal of the peripheral mononuclear phagocytic system and in case of inflammation. This manuscript describes the procedure of real time imaging of the mouse calvaria bone marrow to study the monocyte mobilisation mechanism.

Real time multiphoton imaging provides a great opportunity to study cell trafficking and cell-to-cell interactions in their physiological 3-dimensionnal ...

Immunology and Infection

Femoral Bone Marrow Aspiration in Live Mice

Serial sampling of the cellular composition of bone marrow (BM) is a routine procedure critical to clinical hematology. This protocol describes a detailed step-by-step technical procedure for an analogous procedure in live mice which allows for serial characterization of cells present in the BM. This procedure facilitates studies aimed to detect the presence of exogenously administered cells within the BM of mice as would be done in xenograft studies for instance. Moreover, this procedure allows for the retrieval and characterization of cells enriched in the BM such as hematopoietic stem and progenitor cells (HSPCs) without sacrifice of mice. Given that the cellular composition of peripheral blood is not necessarily reflective of proportions and types of stem and progenitor cells present in the marrow, procedures which provide access to this compartment without requiring termination of the mice are very helpful. The use of femoral bone marrow aspiration is illustrated here for cytological analysis of marrow cells, flow cytometric characterization of the hematopoietic stem/progenitor compartment, and culture of sorted HSPCs obtained by femoral BM aspiration compared with conventional marrow harvest.

This protocol describes a procedure for serial sampling of femoral bone marrow (BM) without requiring the sacrifice of mice. This procedure facilitates longitudinal studies of the BM composition of mice over time and provides serial access to cells within the BM for ex vivo and transplantation studies.

Serial sampling of the cellular composition of bone marrow (BM) is a routine procedure critical to clinical hematology. This protocol describes a detailed ...

Femur Window Chamber Model for In Vivo Cell Tracking in the Murine Bone Marrow

Bone marrow is a complex organ that contains various hematopoietic and non-hematopoietic cells. These cells are involved in many biological processes, including hematopoiesis, immune regulation and tumor regulation. Commonly used methods for understanding cellular actions in the bone marrow, such as histology and blood counts, provide static information rather than capturing the dynamic action of multiple cellular components in vivo. To complement the standard methods, a window chamber (WC)-based model was developed to enable serial in vivo imaging of cells and structures in the murine bone marrow. This protocol describes a surgical procedure for installing the WC in the femur, in order to facilitate long-term optical access to the femoral bone marrow. In particular, to demonstrate its experimental utility, this WC approach was used to image and track neutrophils within the vascular network of the femur, thereby providing a novel method to visualize and quantify immune cell trafficking and regulation in the bone marrow. This method can be applied to study various biological processes in the murine bone marrow, such as hematopoiesis, stem cell transplantation, and immune responses in pathological conditions, including cancer.

Femur Window Chamber Model for In Vivo Cell Tracking in the Murine Bone Marrow

The protocol describes a novel murine femur window chamber model that can be used to track movement of cells in the femoral bone marrow in vivo. Intravital multiphoton fluorescence microscopy is used to image three components of the femoral bone marrow (vasculature, collagen matrix, and neutrophils) over time.

Bone marrow is a complex organ that contains various hematopoietic and non-hematopoietic cells. These cells are involved in many biological processes, ...

Bioengineering Human Microvascular Networks in Immunodeficient Mice

The future of tissue engineering and cell-based therapies for tissue regeneration will likely rely on our ability to generate functional vascular networks in vivo. In this regard, the search for experimental models to build blood vessel networks in vivo is of utmost importance 1. The feasibility of bioengineering microvascular networks in vivo was first shown using human tissue-derived mature endothelial cells (ECs) 2-4; however, such autologous endothelial cells present problems for wide clinical use, because they are difficult to obtain in sufficient quantities and require harvesting from existing vasculature. These limitations have instigated the search for other sources of ECs. The identification of endothelial colony-forming cells (ECFCs) in blood presented an opportunity to non-invasively obtain ECs 5-7. We and other authors have shown that adult and cord blood-derived ECFCs have the capacity to form functional vascular networks in vivo 7-11. Importantly, these studies have also shown that to obtain stable and durable vascular networks, ECFCs require co-implantation with perivascular cells. The assay we describe here illustrates this concept: we show how human cord blood-derived ECFCs can be combined with bone marrow-derived mesenchymal stem cells (MSCs) as a single cell suspension in a collagen/fibronectin/fibrinogen gel to form a functional human vascular network within 7 days after implantation into an immunodeficient mouse. The presence of human ECFC-lined lumens containing host erythrocytes can be seen throughout the implants indicating not only the formation (de novo) of a vascular network, but also the development of functional anastomoses with the host circulatory system. This murine model of bioengineered human vascular network is ideally suited for studies on the cellular and molecular mechanisms of human vascular network formation and for the development of strategies to vascularize engineered tissues.

Here, we describe a methodology to deliver human cord blood-derived endothelial colony-forming cells (ECFCs) and bone marrow-derived mesenchymal stem cells (MSCs), embedded in a collagen/fibronectin gel, subcutaneously into immunodeficient mice. This cell/gel combination generates a human vascular network that connects with the mouse vasculature.

The future of tissue engineering and cell-based therapies for tissue regeneration will likely rely on our ability to generate functional vascular networks ...

Biology

In vivo Clonal Tracking of Hematopoietic Stem and Progenitor Cells Marked by Five Fluorescent Proteins using Confocal and Multiphoton Microscopy

We developed and validated a fluorescent marking methodology for clonal tracking of hematopoietic stem and progenitor cells (HSPCs) with high spatial and temporal resolution to study in vivo hematopoiesis using the murine bone marrow transplant experimental model. Genetic combinatorial marking using lentiviral vectors encoding fluorescent proteins (FPs) enabled cell fate mapping through advanced microscopy imaging. Vectors encoding five different FPs: Cerulean, EGFP, Venus, tdTomato, and mCherry were used to concurrently transduce HSPCs, creating a diverse palette of color marked cells. Imaging using confocal/two-photon hybrid microscopy enables simultaneous high resolution assessment of uniquely marked cells and their progeny in conjunction with structural components of the tissues. Volumetric analyses over large areas reveal that spectrally coded HSPC-derived cells can be detected non-invasively in various intact tissues, including the bone marrow (BM), for extensive periods of time following transplantation. Live studies combining video-rate multiphoton and confocal time-lapse imaging in 4D demonstrate the possibility of dynamic cellular and clonal tracking in a quantitative manner.

In vivo Clonal Tracking of Hematopoietic Stem and Progenitor Cells Marked by Five Fluorescent Proteins using Confocal and Multiphoton Microscopy

Combinatorial 5 fluorescent proteins marking of hematopoietic stem and progenitor cells allows in vivo clonal tracking via confocal and two-photon microscopy, providing insights into bone marrow hematopoietic architecture during regeneration. This method allows non-invasive fate mapping of spectrally-coded HSPCs-derived cells in intact tissues for extensive periods of time following transplantation.

We developed and validated a fluorescent marking methodology for clonal tracking of hematopoietic stem and progenitor cells (HSPCs) with high spatial and ...

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

Through a delicate balance between quiescence and proliferation, self renewal and production of differentiated progeny, hematopoietic stem cells (HSCs) maintain the turnover of all mature blood cell lineages. The coordination of the complex signals leading to specific HSC fates relies upon the interaction between HSCs and the intricate bone marrow microenvironment, which is still poorly understood[1-2].
We describe how by combining a newly developed specimen holder for stable animal positioning with multi-step confocal and two-photon in vivo imaging techniques, it is possible to obtain high-resolution 3D stacks containing HSPCs and their surrounding niches and to monitor them over time through multi-point time-lapse imaging. High definition imaging allows detecting ex vivo labeled hematopoietic stem and progenitor cells (HSPCs) residing within the bone marrow. Moreover, multi-point time-lapse 3D imaging, obtained with faster acquisition settings, provides accurate information about HSPC movement and the reciprocal interactions between HSPCs and stroma cells.
Tracking of HSPCs in relation to GFP positive osteoblastic cells is shown as an exemplary application of this method. This technique can be utilized to track any appropriately labeled hematopoietic or stromal cell of interest within the mouse calvarium bone marrow space.

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

The nature of the interactions between hematopoietic stem and progenitor cells (HSPCs) and bone marrow niches is poorly understood. Custom hardware modifications and a multi-step acquisition protocol allow the use of two-photon and confocal microscopy to image ex vivo labeled HSPCs homed within bone marrow areas, tracking interactions and movement.

Through a delicate balance between quiescence and proliferation, self renewal and production of differentiated progeny, hematopoietic stem cells (HSCs) ...

Intrafemoral Injection for Bone Marrow Study in Live Mice

Simplified Intrafemoral Injections Using Live Mice Allow for Continuous Bone Marrow Analysis

Despite the complexity of hematopoietic cell transplantation in humans, researchers commonly perform intravenous or intrafemoral (IF) injections in mice. In murine models, this technique has been adapted to enhance the seeding efficiency of transplanted hematopoietic stem and progenitor cells (HSPCs). This paper describes a detailed step-by-step technical procedure of IF injection and the following bone marrow (BM) aspiration in mice that allows for serial characterization of cells present in the BM. This method enables the transplantation of valuable samples with low cell numbers that are particularly difficult to engraft by intravenous injection. This procedure facilitates the creation of xenografts that are critical for pathological analysis. While it is easier to access peripheral blood (PB), the cellular composition of PB does not reflect the BM, which is the niche for HSPCs. Therefore, procedures providing access to the BM compartment are essential for studying hematopoiesis. IF injection and serial BM aspiration, as described here, allow for the prospective retrieval and characterization of cells enriched in the BM, such as HSPCs, without sacrificing the mice.

This protocol describes the intrafemoral injection of a few hematopoietic or leukemic stem cells, including gene-edited cells, in murine xenograft models, which will not only enable the quick and safe transplantation of cells but also serial analyses of the bone marrow.

Despite the complexity of hematopoietic cell transplantation in humans, researchers commonly perform intravenous or intrafemoral (IF) injections in mice. ...

A Human Bone Marrow 3D Model to Investigate the Dynamics and Interactions Between Resident Cells in Physiological or Tumoral Contexts

The medullary niche is a complex ecosystem that is essential to maintain homeostasis for resident cells. Indeed, the bone marrow, which includes a complex extracellular matrix and various cell types, such as mesenchymal stem cells, osteoblasts, and endothelial cells, is deeply involved in hematopoietic stem cell regulation through direct cell-cell interactions, as well as cytokine production. To closely mimic this in vivo structure and conduct experiments reflecting the responses of the human bone marrow, several 3D models have been created based on biomaterials, relying primarily on primary stromal cells. Here, a protocol is described to obtain a minimal and standardized system that is easy to set up and provides features of bone marrow-like structure, which combines different cell populations including endothelial cells, and reflects the heterogeneity of in vivo bone marrow tissue. This 3D bone marrow-like structure-assembled using calcium phosphate-based particles and human cell lines, representative of the bone marrow microenvironment-allows the monitoring of a wide variety of biological processes by combining or replacing different primary cell populations within the system. The final 3D structures can then either be harvested for image analysis after fixation, paraffin-embedding, and histological/immunohistochemical staining for cell localization within the system, or dissociated to collect each cellular component for molecular or functional characterization.

Here, we describe an easy-to-implement, standardized, microphysiological system that reflects the complexity of the human bone marrow's in vivo structure, providing a pertinent model to finely study a broad range of normal and pathological events.

The medullary niche is a complex ecosystem that is essential to maintain homeostasis for resident cells. Indeed, the bone marrow, which includes a complex ...

Bioengineering of Humanized Bone Marrow Microenvironments in Mouse and Their Visualization by Live Imaging

Summary

Explore More Videos

Chapters in this video

Combining Intravital Fluorescent Microscopy (IVFM) with Genetic Models to Study Engraftment Dynamics of Hematopoietic Cells to Bone Marrow Niches

Live Imaging of Drug Responses in the Tumor Microenvironment in Mouse Models of Breast Cancer

Tracking Mouse Bone Marrow Monocytes In Vivo

Femoral Bone Marrow Aspiration in Live Mice

Femur Window Chamber Model for In Vivo Cell Tracking in the Murine Bone Marrow

Bioengineering Human Microvascular Networks in Immunodeficient Mice

In vivo Clonal Tracking of Hematopoietic Stem and Progenitor Cells Marked by Five Fluorescent Proteins using Confocal and Multiphoton Microscopy

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

Simplified Intrafemoral Injections Using Live Mice Allow for Continuous Bone Marrow Analysis

A Human Bone Marrow 3D Model to Investigate the Dynamics and Interactions Between Resident Cells in Physiological or Tumoral Contexts