Name: guidelines and experience using imaging biomarker explorer (ibex) for radiomics
Uploaded: 2018-01-08T15:00:00.000+00:00
Duration: 10 min 17 s
Description: Watch this Scientific Journal Video about Guidelines and Experience Using Imaging Biomarker Explorer IBEX for Radiomics at JoVE.com

Rachel Ger is funded by the Rosalie B. Hite Graduate Fellowship and American Legion Auxiliary Fellowship. Carlos Cardenas has been funded by the George M. Stancel PhD Fellowship in the Biomedical Sciences. The development of IBEX was funded by the NCI (R03 CA178495).

1. Install IBEX
NOTE: To install a source-code version go to step 1.1. Alternatively, to install a stand-alone version go to step 1.2.
<ol>
	<li>Source-code version
	<ol>
		<li>Go to the IBEX source-code version website3. Download the &#34;IBEX_Source.zip&#34; and &#34;How_to_use.pdf&#34; files. Look in the &#34;How_to_use.pdf&#34; file to find the pre-requisites to use the latest IBEX version. 
		NOTE: IBEX works only on 32 bit and 64 bit Matlab versions 2011a and 2014b, respectively.</li>
		<li>Once the download is completed, unzip the &#34;IBEX_Source.zip&#34; and add the \IBEX_Source folder to the local path. 
		NOTE: Instructions on how to add a path can be found on the software references page for &#34;add path&#34;26.</li>
		<li>Type &#34;IBEXMain&#34; in the command window to start IBEX.</li>
	</ol>
	</li>
	<li>Stand-alone version
	<ol>
		<li>Go to the IBEX stand-alone version website4. If installing IBEX for the first time, go to the &#34;Dependencies&#34; folder and download/install the &#34;MCRInstaller.exe,&#34; vc2005redist_x86_new.exe,&#34; and &#34;vc2012redist_x86.exe&#34; files. From the main page, download the &#34;IBEX.exe,&#34; &#34;IBEX.ctf,&#34; &#34;IBEX.ini,&#34; and &#34;How_to_use.pdf&#34; files to the same folder. Look in the &#34;How_to_use.pdf&#34; file for the pre-requisites to use the latest IBEX version.</li>
		<li>Double click &#34;IBEX.exe&#34; to start IBEX.</li>
	</ol>
	</li>
</ol>
2. Set the Location
Note: The images are imported to this set location and the data for this study are stored here as well. IBEX uses the most previously applied location as the default location when re-launched.
<ol>
	<li>Click on the &#34;Location&#34; icon (Figure 1).</li>
	<li>Select user or double click &#34;New User&#34; to create a new user folder. If creating a new user folder, enter the name in the new window then click the &#34;OK&#34; button.</li>
	<li>Select the site within the selected user or double click &#34;New Site&#34; to create a new site folder. If creating a new user folder, enter the name in the new window then click the &#34;OK&#34; button.</li>
	<li>Click the &#34;OK&#34; button at the bottom.</li>
</ol>
3. Import Images
<ol>
	<li>Click on the &#34;Import&#34; icon (Figure 1).</li>
	<li>Select DICOM or Pinnacle9 (Pinnacle file version 9) format by clicking on the name of the format. To import DICOM images go to step 3.3.1. To import Pinnacle9 files go to step 3.3.2.</li>
	<li>Click the &#34;Next&#34; button.
	<ol>
		<li>Import DICOM images 
		NOTE: To import patients individually go to step 3.3.1.1. To import multiple patients at once go to step 3.3.1.2.
		<ol>
			<li>Import each patient individually by selecting the patient folder through the directory.
			<ol>
				<li>Click on the &#34;...&#34; button next to the listed directory to select the patient folder that contains the DICOM images and radiation structure set DICOM file (optional). 
				NOTE: While it is only optional to import a structure set with the patient files, it is highly recommended to do so. IBEX does have a contouring platform within it, but this is somewhat impractical for large datasets. IBEX can accommodate structure sets from commercial software platforms that are familiar contouring tools for radiation oncologists, which makes the workflow much easier. This is typically how IBEX is used in studies.</li>
				<li>Click the &#34;Import&#34; button on the bottom left once IBEX has finished searching the DICOM files, the Patient and Details boxes will be populated.</li>
				<li>Repeat steps 3.3.1.1.1 - 2 for each patient.</li>
				<li>Click the &#34;Exit&#34; button after all patients are imported.</li>
			</ol>
			</li>
			<li>Import all patients at once by checking the &#39;Batch Folder&#39; box in the top right corner. 
			&#8203;NOTE: All patients must have a separate folder containing their respective DICOM files.
			<ol>
				<li>Click on the &#34;...&#34; button next to the listed directory to select the folder that contains all patient folders with their corresponding DICOM images and radiation structure set DICOM file (optional).</li>
				<li>Click the &#34;Import&#34; button. Patients will be imported sequentially. Click the &#34;Exit&#34; button after all patients are imported.</li>
			</ol>
			</li>
		</ol>
		</li>
		<li>Pinnacle files
		<ol>
			<li>Configure the Pinnacle Host and Database within the &#34;\IBEX\ImportExport\ImportModule\Pinnacle9\Pinnacle9ImportMain.INI&#34; file. Click the &#34;Config&#34; button before selecting Pinnacle in the import module box.</li>
			<li>Select the proper Pinnacle Host and Database.</li>
			<li>Enter the Patient MRN, Last Name, or First Name then click elsewhere in the window.</li>
			<li>Click the &#34;Query&#34; button.</li>
			<li>Select the patient in the new window then click the &#34;Transfer&#34; button.</li>
			<li>Click the box of the desired image sets from that patient in the new window and click the &#34;OK&#34; button.</li>
			<li>Click the &#34;OK&#34; button in the new window that is labeled &#34;Data successfully imported.&#34;</li>
			<li>Click the &#34;Exit&#34; button after all patients are imported.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
4. Viewing Images and Regions of Interest (ROIs)
<ol>
	<li>Click on the &#34;Data&#34; icon (Figure 1). Click on the desired patient file to open in the &#34;Select a patient&#34; section of the GUI (top half).</li>
	<li>Click on the image set of the desired patient file to open in the &#34;Select image set(s)&#34; section of the GUI (bottom half). Click the &#34;Open&#34; button.</li>
	<li>Use the arrows beneath the images to scroll through the images, which are shown in the axial, coronal, and sagittal views (from left to right).</li>
	<li>Zoom in on the image by clicking on the &#34;Zoom&#34; button (Figure 2). Draw a box on the image plane to zoom. Right click to zoom out.</li>
	<li>Turn on localizers by selecting the &#34;Intersection&#34; button (Figure 2). 
	NOTE: The lines that appear show where that slice is located in each plane. These lines move when scrolling using the arrows.</li>
	<li>Click on the &#34;Ruler&#34; button (Figure 2) to measure distances. Click and hold the left mouse button to measure between the two points of interest. Release the mouse to remove the measured value from the displayed area.</li>
	<li>Click on the &#34;CT Num&#34; button (Figure 2) to measure the value of a voxel. Click and hold the left mouse button on the voxel of interest, and the value will pop up on the left side of the GUI below the color scale. Release the mouse to remove the measured value from the displayed area.</li>
	<li>Click on the &#34;W/L&#34; button (Figure 2) to window/level the images. Another window will pop up. Drag the left and right sides to the desired area or manually enter the window/level in the Window and Level boxes at the bottom of the new window. Select different window/levels using the first drop down menu on the left ( Figure 2): there are 8 for CT and 1 for PET.</li>
	<li>Select different color scales using the second drop down menu on the left (Figure 2): there are 9 options to choose from.</li>
	<li>Visualize ROIs by clicking on the box next to the ROI to make it visible on the images, or click on the &#34;On All ROIs&#34; button to turn on all patient ROIs.</li>
</ol>
5. Edit ROI
<ol>
	<li>Edit ROIs by clicking on the &#34;Edit ROIs&#34; button in the top left or in the bottom center. Select the contour to edit by clicking the box next to its name.</li>
	<li>Use the &#34;Nudge Contours&#34; button (Figure 3) to push contours in or out as already drawn. Adjust the size of the circle used in the box labeled &#34;D&#34; next to the Nudge Contours button.</li>
	<li>Remove a whole contour slice by using the &#34;Cut Contours&#34; button (Figure 3). Click and hold the left mouse button and draw a box around the ROI to be removed.</li>
	<li>Draw contours 
	&#8203;NOTE: Go to step 5.4.1 to draw contours by connecting points. Go to step 5.4.2 to draw contours by free hand.
	<ol>
		<li>Connecting Points: Use the &#34;Draw Contours (1)&#34; button (Figure 3) to draw a contour on each slice by clicking points around the contour where the points are connected by straight lines. Complete the ROI for that slice by clicking on the first point drawn.</li>
		<li>Free Hand: Use the &#34;Draw Contours (2)&#34; button (Figure 3) to draw a contour by free hand. Hold the left mouse button to draw the contour on the slice. Finish the contour on that slice by coming back to the beginning of the drawn ROI and then releasing the left mouse button.</li>
	</ol>
	</li>
	<li>Click on the &#34;Interpolate contours&#34; button (Figure 3) to interpolate ROIs between slices.</li>
	<li>Click on the &#34;Copy ROI&#34; button to copy the ROI.</li>
	<li>Merge ROIs by selecting multiple ROIs and then clicking the &#34;Merge ROI&#34; button.</li>
	<li>Click the &#34;Delete ROI&#34; button to delete the currently selected ROI.</li>
	<li>Click &#34;Create ROI&#34; to create a new ROI which will cause a window will pop up. Enter the name of the ROI and click the &#34;OK&#34; button. Click the &#34;Save&#34; button. Click the &#34;Exit&#34; button to return to the patient viewer.</li>
</ol>
6. Contours in the Data Set
<ol>
	<li>View contours in the data set
	<ol>
		<li>Click the &#34;Show Data Set&#34; button to view contours in the data set. Click on the name of the data set to view. Click the &#34;Open&#34; button. Select patient contours using the box next to their name. Click the &#34;Delete&#34;, &#34;Move&#34;, or &#34;Copy&#34; button depending on the desired function for that contour. Close the data set window once finished viewing the data set.</li>
	</ol>
	</li>
	<li>Add contours to the data set
	<ol>
		<li>Select contours to add to a data set by clicking the checkbox next to their name then click the &#34;Add to Data Set&#34; button. Click on the name of the data set to add the contours or click the &#34;New&#34; button for a new data set. If New is selected, enter the name of the data set in the new window. Click the &#34;OK&#34; button.</li>
	</ol>
	</li>
	<li>Click the &#34;Import ROIs&#34; button to import a Pinnacle version 9 .roi file if contours were not loaded during Section 3.
	<ol>
		<li>Click the &#34; &#8230;&#34; button to select the file. Click the &#34;Import&#34; button.</li>
	</ol>
	</li>
	<li>Click the &#34;Export ROIs&#34; button to export ROIs.
	<ol>
		<li>Click the &#34; &#8230;&#34; button to select the directory in which exported ROIs will be placed. Click on the name of the format that is preferred for the exported ROIs. Enter anonymization information if that is preferred. Click the Export button. 
		NOTE: The preset is for no anonymization to be performed.</li>
	</ol>
	</li>
	<li>Click the &#34;Exit&#34; button to return to the list of patients and scans.</li>
</ol>
7. Create Feature Set
<ol>
	<li>Click on the &#34;Feature&#34; icon.</li>
	<li>Add preprocessing if desired.
	<ol>
		<li>Click on the &#34;Add&#34; button under &#34;Step1: Preprocess&#34;. Select the preprocessing option from the drop-down menu in the new window.</li>
		<li>Click on the &#34;i&#34; under &#34;Para.&#34; to select the preprocessing parameters. Click on the number under the Value column in the new window of the parameter to change it. Type in the new parameter value and click the &#34;OK&#34; button.</li>
		<li>Click on the &#34;question mark&#34; button in the upper right corner for a description of the preprocessing method and the preprocessing of specific parameters.</li>
		<li>Click the &#34;Add&#34; button. Select the preprocessing step and click the &#34;Delete&#34; button to delete undesired preprocessing steps.</li>
	</ol>
	</li>
	<li>Add the features desired.
	<ol>
		<li>Select the feature category from the drop-down menu under &#34;Step 2: Features Category:&#34;. Repeat steps for multiple categories. 
		&#8203;NOTE: Only one category of features can be added at a time. Different combinations of preprocessing and feature categories can be added to the same feature set if desired.
		<ol>
			<li>Select the &#34;GrayLevelCooccurenceMatrix25&#34; and the &#34;NeighborIntensityDifference25&#34; feature categories to compute the gray level co-occurrence matrix and neighborhood intensity difference matrix, respectively, in 2.5D, which is done by computing the matrix on each slice individually and then summing all matrices together.</li>
			<li>Select the &#34;GrayLevelCooccurenceMatrix3&#34; and the &#34;NeighborIntensityDifference3&#34; feature categories to compute the gray level co-occurrence matrix and neighborhood intensity difference matrix, respectively, in 3D.</li>
		</ol>
		</li>
		<li>Click on the &#34;i&#34; under &#34;Para.&#34; for the parameters selected for that preprocessing. Click on the &#34;question mark&#34; button in the upper right corner for a description of the preprocessing method and the parameters.
		<ol>
			<li>Type in the new parameter value and click the &#34;OK&#34; button.</li>
		</ol>
		</li>
		<li>Click the &#34;Test&#34; button to view a feature category or specific feature. Click the button next to the feature or category desired.
		<ol>
			<li>Select the data set to view the test on and click the &#34;Open&#34; button. Check the box next to the patients from the selected data set to view the test on and click the &#34;Test&#34; button.</li>
		</ol>
		</li>
		<li>Uncheck unwanted features for the category selected; all features are selected after selecting the category. Click the word &#34;Features:&#34; under &#34;Step2: Features&#34; to uncheck all features.</li>
		<li>Click the &#34;Add to Feature Set&#34; button to add all selected features with selected preprocessing.
		<ol>
			<li>Select the feature set to add features to and click the &#34;Open&#34; button or click the &#34;New&#34; button to add features to a new feature set. If creating a new feature set, enter the name of the feature set in the new window and click the &#34;OK&#34; button.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Click the &#34;Show Feature Set&#34; button to view features with corresponding preprocessing techniques to view features in a feature set.
	<ol>
		<li>Select the feature set to view and click the &#34;Open&#34; button or click the &#34;New&#34; button to create a new feature set. If creating a new feature set, enter the name of the feature set in the new window and click the &#34;OK&#34; button.</li>
	</ol>
	</li>
	<li>Click on the &#34;Show Data Set&#34; button to view current data sets.
	<ol>
		<li>Select the data set to view and click the &#34;Open&#34; button or click the &#34;New&#34; button to create a new data set. If creating a new data set, enter the name of the data set in the new window and click the &#34;OK&#34; button.</li>
	</ol>
	</li>
	<li>Click the &#34;Exit&#34; button.</li>
</ol>
8. Output Features
<ol>
	<li>Click the &#34;Result&#34; icon. Click on the data set to run the features under &#34;Step 1: Data Set.&#34;&#160;Click on the feature set to run on the selected data under &#34;Step 2: Feature Set.&#34;</li>
	<li>Click on the &#34;View Data&#34; button to view the selected data set. Click on the &#34;View Feature&#34; button to view the selected feature set.</li>
	<li>Click the &#34;Compute&#38;Save Result&#34; button. Enter the file name for the results and click the &#34;Save&#34; button.</li>
</ol>
9. Statistical Model Building
<ol>
	<li>Open the saved results file. 
	NOTE: This is typically under C:\IBEX\DataIbex\[Selected User in Step 2.2]\[Selected Site in Step 2.3]\1FeatureResultSet_Result, unless otherwise assigned in step 8.4.</li>
	<li>Use the data from the different tabs in the desired statistical tests or model building in software. 
	NOTE: The protocol can be paused at any time. However, it is most convenient after finishing all steps needed for a particular icon, e.g., finishing all of Section 7 which is under the Feature icon.</li>
</ol>

<ol>
	<li>Lambin, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radiomics:+extracting+more+information+from+medical+images+using+advanced+feature+analysis.">Radiomics: extracting more information from medical images using advanced feature analysis.</a> EJC. 48, 441-446 (2012).</li><li>Zhang, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=IBEX:+an+open+infrastructure+software+platform+to+facilitate+collaborative+work+in+radiomics.">IBEX: an open infrastructure software platform to facilitate collaborative work in radiomics.</a> Med Phys. 42, 1341-1353 (2015).</li><li>Haralick, R. M., Shanmugam, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Textural+features+for+image+classification.">Textural features for image classification.</a> IEEE Trans Syst Man Cybern. , 610-621 (1973).</li><li>Galloway, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Texture+analysis+using+gray+level+run+lengths.">Texture analysis using gray level run lengths.</a> Comp Graphics and Im Proc. 4, 172-179 (1975).</li><li>Tang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Texture+information+in+run-length+matrices.">Texture information in run-length matrices.</a> IEEE Trans on Im Proc. 7, 1602-1609 (1998).</li><li>Amadasun, M., King, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Textural+features+corresponding+to+textural+properties.">Textural features corresponding to textural properties.</a> IEEE Trans Syst Man Cybern. 19, 1264-1274 (1989).</li><li>Fave, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preliminary+investigation+into+sources+of+uncertainty+in+quantitative+imaging+features.">Preliminary investigation into sources of uncertainty in quantitative imaging features.</a> Comp Med Imaging Graph. 44, 54-61 (2015).</li><li>Fave, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Can+radiomics+features+be+reproducibly+measured+from+CBCT+images+for+patients+with+non-small+cell+lung+cancer.">Can radiomics features be reproducibly measured from CBCT images for patients with non-small cell lung cancer.</a> Med Phys. 42, 6784-6797 (2015).</li><li>Fave, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impact+of+image+preprocessing+on+the+volume+dependence+and+prognostic+potential+of+radiomics+features+in+non-small+cell+lung+cancer.">Impact of image preprocessing on the volume dependence and prognostic potential of radiomics features in non-small cell lung cancer.</a> Trans Cancer Res. 5, 349-363 (2016).</li><li>Fave, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Delta-radiomics+features+for+the+prediction+of+patient+outcomes+in+non-small+cell+lung+cancer.">Delta-radiomics features for the prediction of patient outcomes in non-small cell lung cancer.</a> Scientific Reports. 7, 588 (2017).</li><li>Fried, D. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stage+III+Non-Small+Cell+Lung+Cancer:+Prognostic+Value+of+FDG+PET+Quantitative+Imaging+Features+Combined+with+Clinical+Prognostic+Factors.">Stage III Non-Small Cell Lung Cancer: Prognostic Value of FDG PET Quantitative Imaging Features Combined with Clinical Prognostic Factors.</a> Radiology. 278, 214-222 (2016).</li><li>Fried, D. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Potential+Use+of+(18)F-fluorodeoxyglucose+Positron+Emission+Tomography-Based+Quantitative+Imaging+Features+for+Guiding+Dose+Escalation+in+Stage+III+Non-Small+Cell+Lung+Cancer.">Potential Use of (18)F-fluorodeoxyglucose Positron Emission Tomography-Based Quantitative Imaging Features for Guiding Dose Escalation in Stage III Non-Small Cell Lung Cancer.</a> IJROBP. 94, 368-376 (2016).</li><li>Mackin, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+Computed+Tomography+Scanner+Variability+of+Radiomics+Features.">Measuring Computed Tomography Scanner Variability of Radiomics Features.</a> Invest radiol. 50, 757-765 (2015).</li><li>Yang, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uncertainty+analysis+of+quantitative+imaging+features+extracted+from+contrast-enhanced+CT+in+lung+tumors.">Uncertainty analysis of quantitative imaging features extracted from contrast-enhanced CT in lung tumors.</a> Comp Med Imaging Graph. 48, 1-8 (2016).</li><li>van Rossum, P. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+incremental+value+of+subjective+and+quantitative+assessment+of+18F-FDG+PET+for+the+prediction+of+pathologic+complete+response+to+preoperative+chemoradiotherapy+in+esophageal+cancer.">The incremental value of subjective and quantitative assessment of 18F-FDG PET for the prediction of pathologic complete response to preoperative chemoradiotherapy in esophageal cancer.</a> JNM. 57, 691-700 (2016).</li><li>Hunter, L. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=NSCLC+tumor+shrinkage+prediction+using+quantitative+image+features.">NSCLC tumor shrinkage prediction using quantitative image features.</a> Comp Med Imaging Graph. 49, 29-36 (2016).</li><li>Hunter, L. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+quality+machine-robust+image+features:+identification+in+nonsmall+cell+lung+cancer+computed+tomography+images.">High quality machine-robust image features: identification in nonsmall cell lung cancer computed tomography images.</a> Med Phys. 40, 121916 (2013).</li><li>Fried, D. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prognostic+value+and+reproducibility+of+pretreatment+CT+texture+features+in+stage+III+non-small+cell+lung+cancer.">Prognostic value and reproducibility of pretreatment CT texture features in stage III non-small cell lung cancer.</a> IJROBP. 90, 834-842 (2014).</li><li>Gan, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MO-DE-207B-09:+A+Consistent+Test+for+Radiomics+Softwares.">MO-DE-207B-09: A Consistent Test for Radiomics Softwares.</a> Med Phys. 43, 3706-3706 (2016).</li><li>Klawikowski, S., Christian, J., Schott, D., Zhang, M., Li, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=SU-D-207B-07:+Development+of+a+CT-Radiomics+Based+Early+Response+Prediction+Model+During+Delivery+of+Chemoradiation+Therapy+for+Pancreatic+Cancer.">SU-D-207B-07: Development of a CT-Radiomics Based Early Response Prediction Model During Delivery of Chemoradiation Therapy for Pancreatic Cancer.</a> Med Phys. 43, 3350-3350 (2016).</li><li>Huang, W., Tu, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=SU-F-R-22:+Malignancy+Classification+for+Small+Pulmonary+Nodules+with+Radiomics+and+Logistic+Regression.">SU-F-R-22: Malignancy Classification for Small Pulmonary Nodules with Radiomics and Logistic Regression.</a> Med Phys. 43, 3377-3378 (2016).</li><li>Hanania, A. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+imaging+to+evaluate+malignant+potential+of+IPMNs.">Quantitative imaging to evaluate malignant potential of IPMNs.</a> Oncotarget. 7, 85776-85784 (2016).</li><li>Court, L. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computational+resources+for+radiomics.">Computational resources for radiomics.</a> Trans Cancer Res. 5, 340-348 (2016).</li><li>. Matlab Add path Available from: <a target="_blank" href="https://www.mathworks.com/help/matlab/ref/addpath.html">https://www.mathworks.com/help/matlab/ref/addpath.html</a> (2017)</li><li>Zhao, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reproducibility+of+radiomics+for+deciphering+tumor+phenotype+with+imaging.">Reproducibility of radiomics for deciphering tumor phenotype with imaging.</a> Sci Rep. 6, 23428 (2016).</li><li>Owens, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reproducibility+and+Robustness+of+Radiomic+Features+Extracted+with+Semi-Automatic+Segmentation+Tools.">Reproducibility and Robustness of Radiomic Features Extracted with Semi-Automatic Segmentation Tools.</a> Med Phys. , (2017).</li><li>Kassner, A., Liu, F., Thornhill, R. E., Tomlinson, G., Mikulis, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prediction+of+hemorrhagic+transformation+in+acute+ischemic+stroke+using+texture+analysis+of+postcontrast+T1-weighted+MR+images.">Prediction of hemorrhagic transformation in acute ischemic stroke using texture analysis of postcontrast T1-weighted MR images.</a> JMRI. 30, 933-941 (2009).</li><li>. IBEX Google Forum Available from: <a target="_blank" href="https://groups.google.com/forum/#!forum/ibex_users">https://groups.google.com/forum/#!forum/ibex_users</a> (2017)</li></ol>

The authors have no competing financial interests to disclose.

IBEX is a powerful tool for medical imaging radiomics research. It has thus far mostly been used for radiation oncology purposes in studies conducted by the MD Anderson radiomics group. IBEX allows for manipulation of ROIs and calculation of features within 5 main feature categories. The source code version of IBEX allows the user to design applications that are not already part of IBEX, such as gray level zone matrix features.
The main steps involved in IBEX are the import of images, contouri...

In medicine, patient disease diagnosis typically incorporates a large number of diagnostic exams such as x-rays, ultrasound, computed tomography (CT), magnetic resonance imaging (MRI), and positron emission tomography (PET) scans to assist in determining the course of patient care. While physicians use these images to qualitatively assess patient&#39;s diagnosis, there may be additional quantitative features that can be extracted to guide patient care. The rationale is that these features may represent proteomic and genomic patterns expressed on the macroscopic scale1. Combining this quantitative information with the current clinical information, e.g., patient demographics, may allow more individualized patient care. This is the theory behind radiomics: feature analysis of images on a voxel level. The features typically fall into 5 main categories: gray level co-occurrence matrix, gray level run length matrix, neighborhood intensity difference matrix, histogram, and shape.
Imaging Biomarker Explorer (IBEX) is an open-source tool for radiomics work2. The graphical user interface (GUI) was developed at MD Anderson Cancer Center with the goal of facilitating the extraction and calculation of quantitative features to assist in decision making in cancer care. A source code3 and a stand-alone4 version are available online. IBEX calculates the 5 most common categories of features used in medical radiomics with parameters that can be set for each feature category. The categories are: gray level co-occurrence matrix5, gray level run length matrix6,7, intensity, neighborhood intensity difference matrix8, and shape. Since IBEX is open source, it allows for harmonized feature extraction results across institutions to easily compare different radiomics studies. All features within IBEX are described in the initial paper by Zhang et al.2
The purpose of this manuscript is to provide guidance on how to use IBEX and to demonstrate its applications through peer-reviewed published studies from the MD Anderson radiomics group. Since its release to the public in 2015, IBEX has been used to calculate features from CT, PET, and MRI scan images by the MD Anderson radiomics group, typically investigating features to improve clinical survival models9,10,11,12,13,14,15,16,17,18,19,20 and by outside institutions21,22,23,24. Additional guidance on software tools that can be used for the steps in radiomics research that are not included in IBEX can be found in Court et al.25
A general introduction to the workflow of IBEX will help to organize data properly before starting radiomics projects utilizing IBEX. If importing DICOM images, IBEX requires that each patient have their own folder with their DICOM images. DICOM radiation structure set is optional to include in the patient folder, but is recommended instead of using the contouring platform in IBEX. To assist with importing all patients for a specific study, all patient folders can be placed into one folder together so that all data may be imported into IBEX using only one step. If importing patients from Pinnacle, it is best to have the structure set with the patient plan. As patients may have multiple image sets and plans within Pinnacle, it is best to know which image set and plan are correct before importing. If computation time is a concern, reducing the number of image slices for a patient can drastically reduce time. For example, if only the liver is of interest in a study but the patients have full body CT scans, reducing the DICOM slices to only the extent of the area of interest can shorten computation time (e.g., reducing the DICOM from 300 slices to 50 slices can take 1/6th the time). There are different tools available to perform this slice reduction, from manual to semi-automatic.

<table><tbody><tr><td>Excel</td><td>Microsoft Office</td><td></td><td>Any version of excel should work.</td></tr><tr><td>Matlab</td><td>MathWorks</td><td></td><td>Only use IBEX on 32 bit Matlab 2011a or 64 bit Matlab 2014b.</td></tr></tbody></table>

guidelines and experience using imaging biomarker explorer (ibex) for radiomics

Imaging Biomarker Explorer (IBEX) is an open-source tool for medical imaging radiomics work. The purpose of this paper is to describe how to use IBEX's graphical user interface (GUI) and to demonstrate how IBEX calculated features have been used in clinical studies. IBEX allows for the import of DICOM images with DICOM radiation therapy structure files or Pinnacle files. Once the images are imported, IBEX has tools within the Data Selection GUI to manipulate the viewing of the images, measure voxel values and distances, and create and edit contours. IBEX comes with 27 preprocessing and 132 feature choices to design feature sets. Each preprocessing and feature category has parameters that can be altered. The output from IBEX is a spreadsheet that contains: 1) each feature from the feature set calculated for each contour in a data set, 2) image information about each contour in a data set, and 3) a summary of the preprocessing and features used with their selected parameters. Features calculated from IBEX have been used in studies to test the variability of features under different imaging conditions and in survival models to improve current clinical models.

The output from IBEX is a spreadsheet (see Figure 4) that contains 3 tabs. The &#34;Results&#34; tab contains the feature values for each ROI in the data set (Figure 4A). The &#34;Data Info.&#34; tab contains information about the images taken from each ROI in the data set (Figure 4B). The &#34;Feature Info.&#34; tab contains a comprehensive list of features used wit...

Watch this Scientific Journal Video about Guidelines and Experience Using Imaging Biomarker Explorer IBEX for Radiomics at JoVE.com

Guidelines and Experience Using Imaging Biomarker Explorer IBEX for Radiomics

We describe IBEX, an open-source tool designed for medical imaging radiomics studies, and how to use this tool. In addition, some published works that have used IBEX for uncertainty analysis and model building are showcased.

Guidelines and Experience Using Imaging Biomarker Explorer (IBEX) for Radiomics

Imaging Biomarker Explorer (IBEX) is an open-source tool for medical imaging radiomics work. The purpose of this paper is to describe how to use IBEX's ...

guidelines-experience-using-imaging-biomarker-explorer-ibex-for

Universidad San Sebastian

Research

JoVE Journal

Engineering

13.1K Views.  The University of Texas MD Anderson Cancer Center. We describe IBEX, an open-source tool designed for medical imaging radiomics studies, and how to use this tool. In addition, some published works that have used IBEX for uncertainty analysis and model building are showcased.

Video: Guidelines and Experience Using Imaging Biomarker Explorer IBEX for Radiomics

Registered Bioimaging of Nanomaterials for Diagnostic and Therapeutic Monitoring 

Nanomedications can be carried by blood borne monocyte-macrophages into the reticuloendothelial system (RES; spleen, liver, lymph nodes) and to end organs. The latter include the lung, RES, and brain and are operative during human immunodeficiency virus type one (HIV-1) infection. Macrophage entry into tissues is notable in areas of active HIV-1 replication and sites of inflammation. In order to assess the potential of macrophages as nanocarriers, superparamagnetic iron-oxide and/or drug laden particles coated with surfactants were parenterally injected into HIV-1 encephalitic mice. This was done to quantitatively assess particle and drug biodistribution. Magnetic resonance imaging (MRI) test results were validated by histological coregistration and enhanced image processing. End organ disease as typified by altered brain histology were assessed by MRI. The demonstration of robust migration of nanoformulations into areas of focal encephalitis provides '"proof of concept" for the use of advanced bioimaging techniques to monitor macrophage migration. Importantly, histopathological aberrations in brain correlate with bioimaging parameters making the general utility of MRI in studies of cell distribution in disease feasible. We posit that using such methods can provide a real time index of disease burden and therapeutic efficacy with translational potential to humans.

Registered Bioimaging of Nanomaterials for Diagnostic and Therapeutic Monitoring

Bioimaging methods used to assess cell biodistribution of nanoparticles are applicable for therapeutic and diagnostic monitoring of nanoformulated compounds. The methods described herein are sensitive and specific when assessed by histological coregistration. The methodologies provide a translational pathway from rodent to human applications.

Nanomedications can be carried by blood borne monocyte-macrophages into the reticuloendothelial system (RES; spleen, liver, lymph nodes) and to end ...

Bioengineering

Selecting Multiple Biomarker Subsets with Similarly Effective Binary Classification Performances

Biomarker detection is one of the more important biomedical questions for high-throughput &#39;omics&#39; researchers, and almost all existing biomarker detection algorithms generate one biomarker subset with the optimized performance measurement for a given dataset. However, a recent study demonstrated the existence of multiple biomarker subsets with similarly effective or even identical classification performances. This protocol presents a simple and straightforward methodology for detecting biomarker subsets with binary classification performances, better than a user-defined cutoff. The protocol consists of data preparation and loading, baseline information summarization, parameter tuning, biomarker screening, result visualization and interpretation, biomarker gene annotations, and result and visualization exportation at publication quality. The proposed biomarker screening strategy is intuitive and demonstrates a general rule for developing biomarker detection algorithms. A user-friendly graphical user interface (GUI) was developed using the programming language Python, allowing biomedical researchers to have direct access to their results. The source code and manual of kSolutionVis can be downloaded from http://www.healthinformaticslab.org/supp/resources.php.

Existing algorithms generate one solution for a biomarker detection dataset. This protocol demonstrates the existence of multiple similarly effective solutions and presents a user-friendly software to help biomedical researchers investigate their datasets for the proposed challenge. Computer scientists may also provide this feature in their biomarker detection algorithms.

Biomarker detection is one of the more important biomedical questions for high-throughput &#39;omics&#39; researchers, and almost all existing biomarker ...

Cancer Research

Performing Data Mining And Integrative Analysis Of Biomarker in Breast Cancer Using Multiple Publicly Accessible Databases

In recent years, emerging databases were designed to lower the barriers for approaching the intricate cancer genomic datasets, thereby, facilitating investigators to analyze and interpret genes, samples and clinical data across different types of cancer. Herein, we describe a practical operation procedure, taking ID1 (Inhibitor of DNA binding proteins 1) as an example, to characterize the expression patterns of biomarker and survival predictors of breast cancer based on pooled clinical datasets derived from online accessible databases, including ONCOMINE, bcGenExMiner v4.0 (Breast cancer gene-expression miner v4.0), GOBO (Gene expression-based Outcome for Breast cancer Online), HPA (The human protein atlas), and Kaplan-Meier plotter. The analysis began with querying the expression pattern of the gene of interest (e.g., ID1) in cancerous samples vs. normal samples. Then, the correlation analysis between ID1 and clinicopathological characteristics in breast cancer was performed. Next, the expression profiles of ID1 was stratified according to different subgroups. Finally, the association between ID1 expression and survival outcome was analyzed. The operation procedure simplifies the concept to integrate multidimensional data types at the gene level from different databases and test hypotheses regarding recurrence and genomic context of gene alteration events in breast cancer. This method can improve the credibility and representativeness of the conclusions, thereby, present informative perspective on a gene of interest.

Here, we present a protocol to explore the biomarker and survival predictor of breast cancer based on the comprehensive analysis of pooled clinical datasets derived from a variety of publicly accessible databases, using the strategy of expression, correlation and survival analysis step by step.

In recent years, emerging databases were designed to lower the barriers for approaching the intricate cancer genomic datasets, thereby, facilitating ...

Machine Learning Algorithms for Early Detection of Bone Metastases in an Experimental Rat Model

Machine learning (ML) algorithms permit the integration of different features into a model to perform classification or regression tasks with an accuracy exceeding its constituents. This protocol describes the development of an ML algorithm to predict the growth of breast cancer bone macrometastases in a rat model before any abnormalities are observable with standard imaging methods. Such an algorithm can facilitate the detection of early metastatic disease (i.e., micrometastasis) that is regularly missed during staging examinations.
The applied metastasis model is site-specific, meaning that the rats develop metastases exclusively in their right hind leg. The model&#8217;s tumor-take rate is 60%&#8211;80%, with macrometastases becoming visible in magnetic resonance imaging (MRI) and positron emission tomography/computed tomography (PET/CT) in a subset of animals 30 days after induction, whereas a second subset of animals exhibit no tumor growth.
Starting from image examinations acquired at an earlier time point, this protocol describes the extraction of features that indicate tissue vascularization detected by MRI, glucose metabolism by PET/CT, and the subsequent determination of the most relevant features for the prediction of macrometastatic disease. These features are then fed into a model-averaged neural network (avNNet) to classify the animals into one of two groups: one that will develop metastases and the other that will not develop any tumors. The protocol also describes the calculation of standard diagnostic parameters, such as overall accuracy, sensitivity, specificity, negative/positive predictive values, likelihood ratios, and the development of a receiver operating characteristic. An advantage of the proposed protocol is its flexibility, as it can be easily adapted to train a plethora of different ML algorithms with adjustable combinations of an unlimited number of features. Moreover, it can be used to analyze different problems in oncology, infection, and inflammation.

This protocol was designed to train a machine learning algorithm to use a combination of imaging parameters derived from magnetic resonance imaging (MRI) and positron emission tomography/computed tomography (PET/CT) in a rat model of breast cancer bone metastases to detect early metastatic disease and predict subsequent progression to macrometastases.

Machine learning (ML) algorithms permit the integration of different features into a model to perform classification or regression tasks with an accuracy ...

Lesion Explorer: A Video-guided, Standardized Protocol for Accurate and Reliable MRI-derived Volumetrics in Alzheimer's Disease and Normal Elderly

Obtaining in vivo human brain tissue volumetrics from MRI is often complicated by various technical and biological issues. These challenges are exacerbated when significant brain atrophy and age-related white matter changes (e.g. Leukoaraiosis) are present. Lesion Explorer (LE) is an accurate and reliable neuroimaging pipeline specifically developed to address such issues commonly observed on MRI of Alzheimer's disease and normal elderly. The pipeline is a complex set of semi-automatic procedures which has been previously validated in a series of internal and external reliability tests1,2. However, LE's accuracy and reliability is highly dependent on properly trained manual operators to execute commands, identify distinct anatomical landmarks, and manually edit/verify various computer-generated segmentation outputs.
LE can be divided into 3 main components, each requiring a set of commands and manual operations: 1) Brain-Sizer, 2) SABRE, and 3) Lesion-Seg. Brain-Sizer's manual operations involve editing of the automatic skull-stripped total intracranial vault (TIV) extraction mask, designation of ventricular cerebrospinal fluid (vCSF), and removal of subtentorial structures. The SABRE component requires checking of image alignment along the anterior and posterior commissure (ACPC) plane, and identification of several anatomical landmarks required for regional parcellation. Finally, the Lesion-Seg component involves manual checking of the automatic lesion segmentation of subcortical hyperintensities (SH) for false positive errors.
While on-site training of the LE pipeline is preferable, readily available visual teaching tools with interactive training images are a viable alternative. Developed to ensure a high degree of accuracy and reliability, the following is a step-by-step, video-guided, standardized protocol for LE's manual procedures.

Lesion Explorer (LE) is a semi-automatic, image-processing pipeline developed to obtain regional brain tissue and subcortical hyperintensity lesion volumetrics from structural MRI of Alzheimer's disease and normal elderly. To ensure a high level of accuracy and reliability, the following is a video-guided, standardized protocol for LE's manual procedures.

Obtaining in vivo human brain tissue volumetrics from MRI is often complicated by various technical and biological issues. These challenges are ...

Medicine

A Robust Discovery Platform for the Identification of Novel Mediators of Melanoma Metastasis

Metastasis is a complex process, requiring cells to overcome barriers that are only incompletely modeled by in vitro assays. A systematic workflow was established using robust, reproducible in vivo models and standardized methods to identify novel players in melanoma metastasis. This approach allows for data inference at specific experimental stages to precisely characterize a gene's role in metastasis. Models are established by introducing genetically modified melanoma cells via intracardiac, intradermal, or subcutaneous injections into mice, followed by monitoring with serial in vivo imaging. Once preestablished endpoints are reached, primary tumors and/or metastases-bearing organs are harvested and processed for various analyses. Tumor cells can be sorted and subjected to any of several 'omics' platforms, including single-cell RNA sequencing. Organs undergo imaging and immunohistopathological analyses to quantify the overall burden of metastases and map their specific anatomic location. This optimized pipeline, including standardized protocols for engraftment, monitoring, tissue harvesting, processing, and analysis, can be adopted for patient-derived, short-term cultures and established human and murine cell lines of various solid cancer types.

This article describes a workflow of techniques employed for testing novel candidate mediators of melanoma metastasis and their mechanism(s) of action.

Metastasis is a complex process, requiring cells to overcome barriers that are only incompletely modeled by in vitro assays. A systematic workflow was ...

Digital Spatial Profiling for Characterization of the Microenvironment in Adult-Type Diffusely Infiltrating Glioma

Diffusely infiltrating gliomas are associated with high morbidity and mortality due to the infiltrative nature of tumor spread. They are morphologically complex tumors, with a high degree of proteomic variability across both the tumor itself and its heterogenous microenvironment. The malignant potential of these tumors is enhanced by the dysregulation of proteins involved in several key pathways, including processes that maintain cellular stability and preserve the structural integrity of the microenvironment. Although there have been numerous bulk and single-cell glioma analyses, there is a relative paucity of spatial stratification of these proteomic data. Understanding differences in spatial distribution of tumorigenic factors and immune cell populations between the intrinsic tumor, invasive edge, and microenvironment offers valuable insight into the mechanisms underlying tumor proliferation and propagation. Digital spatial profiling (DSP) represents a powerful technology that can form the foundation for these important multilayer analyses.
DSP is a method that efficiently quantifies protein expression within user-specified spatial regions in a tissue specimen. DSP is ideal for studying the differential expression of multiple proteins within and across regions of distinction, enabling multiple levels of quantitative and qualitative analysis. The DSP protocol is systematic and user-friendly, allowing for customized spatial analysis of proteomic data. In this experiment, tissue microarrays are constructed from archived glioblastoma core biopsies. Next, a panel of antibodies is selected, targeting proteins of interest within the sample. The antibodies, which are preconjugated to UV-photocleavable DNA oligonucleotides, are then incubated with the tissue sample overnight. Under fluorescence microscopy visualization of the antibodies, regions of interest (ROIs) within which to quantify protein expression are defined with the samples. UV light is then directed at each ROI, cleaving the DNA oligonucleotides. The oligonucleotides are microaspirated and counted within each ROI, quantifying the corresponding protein on a spatial basis.

Proteomic dysregulation plays an important role in the spread of diffusely infiltrating gliomas, but several relevant proteins remain unidentified. Digital spatial processing (DSP) offers an efficient, high-throughput approach for characterizing the differential expression of candidate proteins that may contribute to the invasion and migration of infiltrative gliomas.

Diffusely infiltrating gliomas are associated with high morbidity and mortality due to the infiltrative nature of tumor spread. They are morphologically ...

Radiation Response in Patient-Derived Tumor Organoids Using a Clonogenic Assay

Live Imaging to Quantify Cellular Radiosensitivity in Patient-Derived Tumor Organoids

Radiation therapy (RT) is one of the mainstays of modern clinical cancer management. However, not all cancer types are equally sensitive to irradiation, often (but not always) because of differences in the ability of malignant cells to repair oxidative DNA damage as elicited by ionizing rays. Clonogenic assays have been employed for decades to assess the sensitivity of cultured cancer cells to ionizing irradiation, largely because irradiated cancer cells often die in a delayed manner that is difficult to quantify with short-term flow cytometry- or microscopy-assisted techniques. Unfortunately, clonogenic assays cannot be employed as such for more complex tumor models, such as patient-derived tumor organoids (PDTOs). Indeed, irradiating established PDTOs may not necessarily abrogate their growth as multicellular units, unless their stem-like compartment is completely eradicated. Moreover, irradiating PDTO-derived single-cell suspensions may not properly recapitulate the sensitivity of malignant cells to RT in the context of established PDTOs. Here, we detail an adaptation of conventional clonogenic assays that involves exposure of established PDTOs to ionizing radiation, followed by single-cell dissociation, replating in suitable culture conditions and live imaging. Non-irradiated (control) PDTO-derived stem-like cells reform growing PDTOs with a PDTO-specific efficiency, which is negatively influenced by irradiation in a dose-dependent manner. In these conditions, PDTO-forming efficiency and growth rate can be quantified as a measure of radiosensitivity on time-lapse images collected until control PDTOs achieve a predefined space occupancy.

Author Spotlight: Radiotherapy and Clonogenic Assays for Advancing Cancer Research and Personalized Medicine

Here, we detail a straightforward live imaging approach for quantifying the sensitivity of patient-derived tumor organoids to ionizing radiation.

Radiation therapy (RT) is one of the mainstays of modern clinical cancer management. However, not all cancer types are equally sensitive to irradiation, ...

Visualization, Quantification, and Mapping of Immune Cell Populations in the Tumor Microenvironment

The immune landscape of the tumor microenvironment (TME) is a determining factor in cancer progression and response to therapy. Specifically, the density and the location of immune cells in the TME have important diagnostic and prognostic values. Multiomic profiling of the TME has exponentially increased our understanding of the numerous cellular and molecular networks regulating tumor initiation and progression. However, these techniques do not provide information about the spatial organization of cells or cell-cell interactions. Affordable, accessible, and easy to execute multiplexing techniques that allow spatial resolution of immune cells in tissue sections are needed to complement single cell-based high-throughput technologies. Here, we describe a strategy that integrates serial imaging, sequential labeling, and image alignment to generate virtual multiparameter slides of whole tissue sections. Virtual slides are subsequently analyzed in an automated fashion using user-defined protocols that enable identification, quantification, and mapping of cell populations of interest. The image analysis is done, in this case using the analysis modules Tissuealign, Author, and HISTOmap. We present an example where we applied this strategy successfully to one clinical specimen, maximizing the information that can be obtained from limited tissue samples and providing an unbiased view of the TME in the entire tissue section.

Here, we describe a simple and accessible strategy for visualizing, quantifying, and mapping immune cells in formalin-fixed paraffin-embedded tumor tissue sections. This methodology combines existing imaging and digital analysis techniques with the purpose of expanding the multiplexing capability and multiparameter analysis of imaging assays.

The immune landscape of the tumor microenvironment (TME) is a determining factor in cancer progression and response to therapy. Specifically, the density ...

Immunology and Infection

Effective Co-Registration of Two Preclinical Imaging Modalities Across Devices

Multimodal Cross-Device and Marker-Free Co-Registration of Preclinical Imaging Modalities

Integrated preclinical multimodal imaging systems, such as X-ray computed tomography (CT) combined with positron emission tomography (PET) or magnetic resonance imaging (MRI) combined with PET, are widely available and typically provide robustly co-registered volumes. However, separate devices are often needed to combine a standalone MRI with an existing PET-CT or to incorporate additional data from optical tomography or high-resolution X-ray microtomography. This necessitates image co-registration, which involves complex aspects such as multimodal mouse bed design, fiducial marker inclusion, image reconstruction, and software-based image fusion. Fiducial markers often pose problems for in vivo data due to dynamic range issues, limitations on the imaging field of view, difficulties in marker placement, or marker signal loss over time (e.g., from drying or decay). These challenges must be understood and addressed by each research group requiring image co-registration, resulting in repeated efforts, as the relevant details are rarely described in existing publications.
This protocol outlines a general workflow that overcomes these issues. Although a differential transformation is initially created using fiducial markers or visual structures, such markers are not required in production scans. The requirements for the volume data and the metadata generated by the reconstruction software are detailed. The discussion covers achieving and verifying requirements separately for each modality. A phantom-based approach is described to generate a differential transformation between the coordinate systems of two imaging modalities. This method showcases how to co-register production scans without fiducial markers. Each step is illustrated using available software, with recommendations for commercially available phantoms. The feasibility of this approach with different combinations of imaging modalities installed at various sites is showcased.

Author Spotlight: An Efficient and Robust Software for Automated Fusion of Multiple Preclinical Imaging Modalities

The combination of multiple imaging modalities is often necessary to gain a comprehensive understanding of pathophysiology. This approach utilizes phantoms to generate a differential transformation between the coordinate systems of two modalities, which is then applied for co-registration. This method eliminates the need for fiducials in production scans.

Integrated preclinical multimodal imaging systems, such as X-ray computed tomography (CT) combined with positron emission tomography (PET) or magnetic ...

Guidelines and Experience Using Imaging Biomarker Explorer (IBEX) for Radiomics

Summary

Explore More Videos

Chapters in this video

Registered Bioimaging of Nanomaterials for Diagnostic and Therapeutic Monitoring

Selecting Multiple Biomarker Subsets with Similarly Effective Binary Classification Performances

Performing Data Mining And Integrative Analysis Of Biomarker in Breast Cancer Using Multiple Publicly Accessible Databases

Machine Learning Algorithms for Early Detection of Bone Metastases in an Experimental Rat Model

Lesion Explorer: A Video-guided, Standardized Protocol for Accurate and Reliable MRI-derived Volumetrics in Alzheimer's Disease and Normal Elderly

A Robust Discovery Platform for the Identification of Novel Mediators of Melanoma Metastasis

Digital Spatial Profiling for Characterization of the Microenvironment in Adult-Type Diffusely Infiltrating Glioma

Live Imaging to Quantify Cellular Radiosensitivity in Patient-Derived Tumor Organoids

Visualization, Quantification, and Mapping of Immune Cell Populations in the Tumor Microenvironment

Multimodal Cross-Device and Marker-Free Co-Registration of Preclinical Imaging Modalities