JoVE Logo

Accedi

Chapter 10

Elasticity, Creep, and Shrinkage in Concrete

Elasticità nel calcestruzzo
Elasticità nel calcestruzzo
When a concrete specimen is subjected to moderate or high magnitude uniaxial compressive or tensile stresses,  the resulting strain varies ...
Modulo dinamico di elasticità del calcestruzzo
Modulo dinamico di elasticità del calcestruzzo
Stress analysis in concrete structures prone to dynamic and impact loading employs the dynamic modulus, which is greater than the static modulus of ...
Scorrimento nel calcestruzzo
Scorrimento nel calcestruzzo
When a loaded concrete member is subjected to constant stress that is sustained over time, the strain in the member increases, resulting in its ...
Fattori che influenzano lo scorrimento
Fattori che influenzano lo scorrimento
In concrete mixes, the hardened cement paste primarily contributes to creep, while the aggregates in the mix restrain creep. Aggregates with a high ...
Effetti del biostrato
Effetti del biostrato
Reinforced concrete beams subjected to creep undergo increased deflection. This may result in further bending of the beam, widening existing cracks, and ...
Ritiro nel calcestruzzo
Ritiro nel calcestruzzo
The loss of water or chemical reactions reduces the concrete's volume, a process known as shrinkage.  Practically, shrinkage in concrete is ...
Essiccazione Ritiro
Essiccazione Ritiro
When hardened concrete is exposed to unsaturated air, the free water present in its capillaries evaporates out of the pores. This causes the movement of ...
Restringimento da carbonatazione
Restringimento da carbonatazione
In the presence of moisture, atmospheric carbon dioxide entering the concrete surface transforms into carbonic acid, which chemically reacts with the ...
Tipi di crepe non strutturali nel calcestruzzo
Tipi di crepe non strutturali nel calcestruzzo
After placing concrete, water may rise to the top of the mix, settling the aggregates. If reinforcements within the concrete obstruct this natural ...
Calcestruzzo di massa
Calcestruzzo di massa
When large volumes of concrete are placed, if the temperature of the concrete on the surface and the interior region is different, thermal cracks may ...
Calivo
Calivo
In dry and hot conditions, placing fresh concrete at high temperatures accelerates the setting and leads to rapid evaporation of water from the concrete, ...
Calcestruzzo per climi freddi
Calcestruzzo per climi freddi
During cold weather, when freshly placed concrete starts to freeze before it sets, the water in the concrete converts to ice, resulting in its expansion. ...
JoVE Logo

Riservatezza

Condizioni di utilizzo

Politiche

Ricerca

Didattica

CHI SIAMO

Copyright © 2025 MyJoVE Corporation. Tutti i diritti riservati