JoVE Logo

Sign In

Chapter 8

Mixing, Placing and Curing Concrete

ערבוב בטון
ערבוב בטון
The primary goal of mixing concrete is to stir its ingredients, ensuring the aggregates are evenly coated with cement paste, resulting in a uniform ...
זמן ערבוב
זמן ערבוב
Concrete mixers are initially charged with 10 percent of the total water, followed by consistent additions of solid materials and 80 percent of the total ...
בטון מעורב מוכן
בטון מעורב מוכן
Concrete that is prepared at a centralized facility and then delivered to the job site in trucks, ready for placement, is known as ready-mixed or ...
בטון שאוב
בטון שאוב
Concrete can be transported through pipelines over long distances to be placed in locations difficult to access, such as deep foundation pits. The system ...
הצבת בטון
הצבת בטון
Concrete should be placed close to its final position in uniform horizontal layers. After laying, the concrete layer is fully compacted to expel the ...
בטון רוטט
בטון רוטט
Mechanical vibrators are used to compact freshly placed concrete in forms and around the reinforcement to expel the entrapped air and form a dense ...
שוטקרט
שוטקרט
Shotcrete involves spraying mortar or small aggregate concrete rich in mortar through a hose at high velocity onto a surface that is typically ...
בטון אגרגטים מוחלף
בטון אגרגטים מוחלף
Preplaced aggregate concrete is produced by initially placing gap-graded coarse aggregate that is sufficiently wet within the formwork and compacting it. ...
גמר בטון
גמר בטון
After consolidating the placed concrete, excess material is removed from the surface and flushed with the formwork's top using a screed. Subsequently, ...
ריפוי בטון
ריפוי בטון
Cement hydration occurs in the water-filled capillary pores of cement paste. Environmental factors like air temperature, humidity, and wind can cause ...
שיטות ריפוי
שיטות ריפוי
Oiling and moistening forms before pouring concrete aid in curing concrete members with a small surface-to-volume ratio. These forms may be left in place ...
ריפוי מואץ של בטון
ריפוי מואץ של בטון
Concrete curing is accelerated by applying heat and adding moisture, yielding concrete with higher early strength. Steam curing, often used for precast ...
JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved