The authors thank the staff of the animal facility (BRC) for their ongoing support. This work was funded by the National Health and Medical Research Council and the Australian Research Council.

All procedures have been approved by the University of New South Wales Animals Care and Ethics Committee.
1. Preparation of the Transgene (Random Integration)
<ol>
	<li>Analytical agarose gel electrophoresis.
	<ol>
		<li>Digest the plasmid to excise the transgene using appropriate enzymes (1 h incubation) or fast-digest enzymes (15 to 30 min incubation) in a thermocycler following the manufacturer&#39;s recommendations (see Figure 2A and its legend).</li>
		<li>Cast a 1% tris-acetate-ethylenediaminetetraacetic acid (EDTA) (TEA) agarose gel, stained with 0.5-1.0 &#181;g/mL ethidium bromide (EtBr). 
		NOTE: Use caution when using EtBr; it is a potent mutagen. Please use appropriate personal protective equipment (refer to the material safety data sheet).</li>
		<li>Load a 1 kb molecular weight marker.</li>
		<li>Load the linearized fragments (i.e., transgene and backbone).</li>
		<li>Run the electrophoresis at 100 V for 45 min.</li>
		<li>Visualize the gel on an ultraviolet (UV) transilluminator to check that the digestion is complete and to confirm the correct size of the transgene (i.e., 7,338 bp; see Figure 2A).</li>
	</ol>
	</li>
	<li>Preparative agarose gel electrophoresis.
	<ol>
		<li>Cast a 1% TAE agarose gel stained with a low-toxicity gel stain. Load 8 aliquots (1 &#181;g each) of linearized transgene without a molecular weight marker and run the electrophoresis at 100 V for 45 min. Use a scalpel to excise all 8 bands corresponding to the linearized transgene.</li>
		<li>Extract the DNA using a gel extraction kit by following the manufacturer&#39;s recommendations (see the Table of Materials).
		<ol>
			<li>Melt the gel fragments at 50 &#176;C in 1.5-mL tubes for at least 15 min. Precipitate it with isopropanol and then add the binding buffer.</li>
			<li>Combine the entire DNA by pipetting it all into one column. Elute into nuclease-free microinjection buffer (8 mM Tris-HCl and 0.15 mM EDTA). Filter through a 0.22 &#181;m microcentrifuge filter and centrifuge for 60 s at 12,000 x g.</li>
		</ol>
		</li>
		<li>Measure the concentration and the quality of the DNA using a spectrophotometer. Check that the A260/A280 ratio is around 1.8 (i.e., no contamination by proteins) and the A260/A230 ratio is at least 2.0 (i.e., no contamination by organic solvents). Dilute down to 3 ng/&#181;L in nuclease-free microinjection buffer, aliquot (20-50 &#181;L), and freeze at -20 &#176;C.</li>
	</ol>
	</li>
</ol>
2. Synthesis of CRISPR Components (Gene Targeting)
<ol>
	<li>Cas9 mRNA.
	<ol>
		<li>Dilute the Cas9 mRNA (obtained from a commercial source, see the Table of Materials) to a concentration of 1 &#181;g/&#181;L in nuclease-free microinjection buffer.</li>
		<li>Aliquot in 2 &#181;L and freeze at -80 &#176;C.</li>
	</ol>
	</li>
	<li>Single-guide RNA (SgRNA).
	<ol>
		<li>Identify the desired two-target genomic sequences (guides) using a computational design tool allowing minimal potential off-target activity17.
		<ol>
			<li>For gene knockout, systematically select two guides located a few hundred base-pairs (bp) apart, in opposite directions, and include the start codon of the gene of interest. &#160;For homology direct repair, select two overlapping guides (whenever possible),&#160;in opposite directions. 
			NOTE: As an example, the following guides have recently been successfully co-injected to disrupt the first exon of the TPM4.2 gene: 
			Guide 1: 5&#39; CGCCATCCAGTTCGCGCTGC 3&#39;; 
			Guide 2: 5&#39; CAGAACGATTGAGCTATGGC 3&#39;</li>
		</ol>
		</li>
		<li>Order a set of primers as described in Table 1.</li>
		<li>Synthesize a linear DNA template.
		<ol>
			<li>Dilute px33012 plasmid to 10 ng/&#181;L in nuclease-free water.</li>
			<li>Prepare the master mix as indicated in Table 1. Add the polymerase at the end and keep the master mix on ice.</li>
			<li>Mix and split this into 8 PCR tubes (19 &#181;L/tube). Add 1 &#181;L of px330 per tube and run the PCR under the following conditions: 1 min at 98 &#176;C; 40 cycles of 98 &#176;C for 10 s, 64 &#176;C for 30 s, and 72 &#176;C for 15 s; and a final elongation at 72 &#176;C for 5 min. Hold at 4 &#176;C.</li>
			<li>Purify the PCR products using a PCR purification kit (see the Table of Materials), a manifold, and a vacuum source (for faster processing). Apply the maximum vacuum strength (i.e., 8 mbar).
			<ol>
				<li>Add 5 volumes (100 &#181;L) of binding buffer to 1 volume of the PCR sample and mix.</li>
				<li>Place a (provided) silica membrane spin column in a (provided) 2-mL collection tube for centrifugation, or on the manifold for vacuum processing. To bind DNA, successively apply all 8 samples to the column and vacuum or centrifuge for 60 s at 12,000 x g for each load.</li>
				<li>To wash, add 0.75 mL of wash buffer (buffer PE) to the column and vacuum or centrifuge for 60 s at 12,000 x g. Centrifuge the column for 60 s at 12,000 x g to eliminate residual ethanol.</li>
				<li>Place the column in a clean 1.5-mL microcentrifuge tube. To elute the DNA, add 30 &#181;L of nuclease-free water to the center of the membrane, let the column stand for 1 min, and centrifuge for 60 s at 12,000 g.</li>
			</ol>
			</li>
			<li>Measure the concentration using a spectrophotometer; typically, the concentration should be 100 ng/&#181;L or higher. Check that the A260/A280 ratio is around 1.8 (i.e., no contamination by proteins) and the A260/A230 ratio is at least 2.0 (i.e., no contamination by organic solvents).</li>
		</ol>
		</li>
		<li>In vitro transcription using a T7 RNA synthesis kit.
		<ol>
			<li>Prepare the master mix, as indicated in Table 1, and incubate for 3 h at 37 &#176;C in a thermocycler. Add 28 &#181;L of nuclease-free water and 2 &#181;L of DNase I and incubate for another 15 min at 37 &#176;C in a thermocycler.</li>
		</ol>
		</li>
		<li>RNA purification using spin columns.
		<ol>
			<li>Dissolve the powder contained in the provided spin column in 650 &#181;L of nuclease-free microinjection buffer, carefully removing all air bubbles. Cap the tube and hydrate for 5 - 15 min at room temperature.</li>
			<li>Remove the blue cap at the bottom and place the column in a 2-mL tube. Centrifuge for 2 min at 750 x g and room temperature. Place the column in a fresh 1.5-mL tube and apply 50 &#181;L of the RNA solution dropwise to the center, without touching the column wall. Spin the column for 2 min at 750 x g.</li>
			<li>Measure the RNA concentration using a spectrophotometer (the typical yield of one reaction is 30 - 50 &#181;g). Check that the A260/A280 ratio is around 2.0 (i.e., no contamination by proteins) and the A260/A230 ratio is at least 2.0 (i.e., no contamination by organic solvents). Store the sgRNAs at -80 &#176;C until use.</li>
			<li>Assess the quality of the RNA using the 1% TAE gels routinely used for DNA electrophoresis. Run 200-400 ng of the DNA template and the corresponding sgRNA in parallel. The RNA band (&#8776; 100 bp) should be slightly bigger than the DNA band (see Figure 3A).</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
3. Donor Template
<ol>
	<li>Order commercially synthesized single-stranded oligonucleotides (ssOligos, see the Table of Materials) for point mutations or for the integration of small sequences up to 50 bp; homology arms are typically 60-90 bp long.</li>
	<li>For larger insertions, use a donor plasmid as a template. Generate a suitable plasmid using either the classic cloning method or de novo synthesis from a commercial source. 
	NOTE: A minimum of 800 bp per homology arm is recommended. The size of the backbone has no influence on the efficiency of homology direct repair (HDR).</li>
</ol>
4. Injection Mix
<ol>
	<li>Dilute the Cas9 mRNA to 50 ng/&#181;L and the sgRNAs to 12.5 ng/&#181;L (25 ng/&#181;L in total) using nuclease-free microinjection buffer for gene knockout experiments. Add the donor template (ssOligo or plasmid) at a concentration of 200 ng/&#181;L for genome editing experiments based on homology direct repair. 
	NOTE: Dilution volumes can be easily determined using online tools, such as a resuspension calculator18.</li>
	<li>Keep each aliquot on ice during the microinjection session and discard afterwards (do not re-freeze the injection mix).</li>
</ol>
5. Scrotal Vasectomy
NOTE: Two types of vasectomy are commonly performed in mice: abdominal and scrotal. The latter is less invasive and has been previously described15.
<ol>
	<li>Autoclave all stainless steel surgical instruments.</li>
	<li>Determine the weight of the mouse using a weigh scale and anesthetize the males by intraperitoneal (i.p.) injection with injectable anesthetics (ketamine 100 mg/kg, xylazine 10 mg/kg).</li>
	<li>Monitor the loss of toe pinch reflex and once the mouse is sedated place it on top of a heating pad.</li>
	<li>Disinfect the skin around the testes with alternating wipes of a topical antiseptic such as chlorhexidine and 70% ethanol.</li>
	<li>Push the testes into the scrotal sac and make a skin incision with a scalpel.</li>
	<li>Visualize the testis, cauda epididymis, and vas deferens.</li>
	<li>Grab the vas deferens with forceps, hold it, and cauterize on each side of the forceps to remove 3 mm of the vas deferens.</li>
	<li>Perform the same procedure on the second testis.</li>
	<li>Close the skin incisions with wound clips and monitor the mouse closely until full recovery.</li>
</ol>
6. Superovulation (Oocytes Donors) and Time-mating (Pseudo-pregnant Females)
NOTE: The technique to generate a suitable number of fertilized oocytes and plugged foster females for reimplantation has been described elsewhere15.
<ol>
	<li>Inject 10 females i.p. with 5 IU of pregnant mare&#39;s serum gonadotropin (PMSG; in 100 &#181;L) at around 12 pm on day 1.</li>
	<li>Inject the females i.p. with 5 IU of human chorionic gonadotropin (hCG; in 100 &#181;L) 46-48 h later (at around 11 am on day 3).</li>
	<li>Immediately mate the females with single-housed males overnight.</li>
</ol>
7. Pronuclear (random-integration) and Cytoplasmic (Gene-targeting) Injections
<ol>
	<li>Cull the superovulated mice by cervical dislocation, expose the abdomen, and access the ovaries and oviducts, as previously described15. Dissect the oviducts and harvest the cumulus-oocyte-complexes (COCs) under a stereomicorscope15. Place them in a drop of potassium simplex optimization medium supplemented with amino acids (KSOMaa) following the traditional method15.</li>
	<li>Purify the oocytes by adding approximatively 1 &#181;L of hyaluronidase (10 mg/mL) to the drop of KSOMaa medium using an aspirator mouth piece and place the dish in a 37 &#176;C / 5% CO2 incubator for 30 s to 1 min.</li>
	<li>Wash the oocytes with 4 fresh drops of KSOMaa medium using the aspirator mouth piece and transfer them to a final drop of KSOMaa medium overlaid with mineral oil (around 2 mL). Place the dish in the 37 &#176;C / 5% CO2 incubator until the oocytes are ready for injection.</li>
	<li>Pronuclear injection (random integration).
	<ol>
		<li>Visualize the eggs under the stereoscopic microscope and transfer approximately 50 eggs to the injection chamber (a drop of M2 medium overlaid with mineral oil) using the aspirator mouth piece.</li>
		<li>Transfer the injection chamber to the inverted microscope and inject the fertilized oocytes (two visible pronuclei) with a few picoliters of the injection mix, targeting a pronucleus (any of the pronuclei can be targeted). Visualize a successful injection by observing the swelling of the pronucleus.</li>
	</ol>
	</li>
	<li>Cytoplasmic injection (gene targeting).
	<ol>
		<li>Transfer approximately 50 eggs to a drop of KSOMaa containing 5 &#181;g/mL Cytochalasin B using the mouth piece and incubate for 5 min in the 37 &#176;C / 5% CO2 incubator.</li>
		<li>Transfer the eggs to the injection chamber using the mouth piece.</li>
		<li>Inject few picoliters of the injection mix into the cytoplasm at very low pressure (50-100 hPa), using the compensation pressure of the automated microinjector where possible.</li>
		<li>After injection, transfer the oocytes back into a drop of KSOMaa (using the mouth piece) and keep them in the 37 &#176;C/5% CO2 incubator, until loaded for reimplantation into the oviduct of pseudo-pregnant females.</li>
	</ol>
	</li>
</ol>
8. Reimplantation
<ol>
	<li>Autoclave all stainless steel surgical instruments.</li>
	<li>Determine the weight of the mouse using the weigh scale and anesthetize the females by intraperitoneal (i.p.) injection with injectable anesthetics (ketamine 100 mg/kg, xylazine 10 mg/kg).</li>
	<li>Monitor the loss of toe pinch reflex and once the mouse is sedated place it on top of a heating pad.</li>
	<li>Clip a large area of the fur around the dorsal midline of the female mouse.</li>
	<li>Disinfect the exposed skin with alternating wipes of a topical antiseptic such as chlorhexidine and 70% ethanol.</li>
	<li>Expose the reproductive tract following traditional method15. Make a 1 cm long skin incision parallel to the dorsal midline, cut the muscle and grab the fat pad with a forceps, then gently pull the ovary out until its attached oviduct and uterus are clearly visible.</li>
	<li>Fix the fat pad with a vessel clamp. Visualize the oviduct under the stereoscopic microscope and using a pair of micro-scissors make an incision into the wall of the oviduct few millimeters upstream of the ampulla.</li>
	<li>Under the stereoscopic microscope, load 25 microinjected eggs into the glass capillary connected to the mouth piece (the internal diameter of the capillary should be around 120 &#181;m wide). Introduce the glass capillary into the oviduct and expel until an air bubble is visible inside the ampulla.</li>
	<li>Gently remove the glass capillary and place the reproductive tract back into the abdomen. Suture the incision with 3-0 non-absorbable surgical sutures, then close with wound clips. Monitor the mouse closely until full recovery.</li>
</ol>
9. Genotyping Strategies/Sequencing
NOTE: Isolate the genomic DNA from 2-mm tail or ear biopsies, following relevant animal ethics regulations.
<ol>
	<li>Fast genomic DNA extraction (random integration).
	<ol>
		<li>Lyse the tissue samples (~2 mm) at 95 &#176;C for 1 h in 100 &#181;L of alkaline lysis reagent (25 mM sodium hydroxide and 0.2 mM EDTA, pH = 12).</li>
		<li>Add 100 &#181;L of neutralizing reagent (40 mM Tris-HCl, pH = 5).</li>
		<li>Centrifuge for 5 min at 12,000 g and 4 &#176;C.</li>
	</ol>
	</li>
	<li>High-quality genomic DNA extraction (gene targeting).
	<ol>
		<li>Add 500 &#181;L of tail buffer (50 mM Tris, pH = 8; 100 mM EDTA, pH = 8; 100 mM NaCl; 1% SDS, and 0.5 mg/mL proteinase K, freshly added).</li>
		<li>Incubate overnight at 55 &#176;C.</li>
		<li>Mix for 5 min by inverting (do not vortex).</li>
		<li>Add 250 &#181;L of saturated NaCl (6 M) and mix for 5 min by inverting (do not vortex).</li>
		<li>Spin for 5-10 min at 12,000 x g and 4 &#176;C and pour the supernatant into new tube.</li>
		<li>Add 500 &#181;L of isopropanol and mix for 5 min by inverting (do not vortex).</li>
		<li>Spin for 10 min at 12,000 x g and room temperature.</li>
		<li>Decant the supernatant (the pellet is invisible and sticks to the tube).</li>
		<li>Wash with 1 mL of 70% ethanol.</li>
		<li>Spin for 5-10 min at 12,000 x g and room temperature. Remove the supernatant with care, as the white pellet is not sticky anymore and can be lost.</li>
		<li>Air dry this for ~1 h.</li>
		<li>Add 400 &#181;L of TE buffer (10 mM Tris and 1 mM EDTA, pH = 8).</li>
		<li>Dissolve the DNA at 55-60 &#176;C for 2 h.</li>
	</ol>
	</li>
	<li>Primer design.
	<ol>
		<li>Design primers a minimum of 20 bp long using a computational tool19. 
		NOTE: For random integration, the primers should hybridize with the transgene, generating a distinct fragment of 200-800 bp. For gene targeting, design the primers so that they hybridize with the genomic DNA, generating a distinct fragment a few hundred bp around the cut sites. For large insertions, the primers can sit on the transgene, but confirmation of the targeted integration should subsequently be performed using primer walking or a similar technique.</li>
	</ol>
	</li>
	<li>PCR genotyping.
	<ol>
		<li>For each genomic modification, design a new PCR protocol and test it empirically. Consider the length of the generated fragment and the melting temperature (Tm) of each pair of primers.</li>
	</ol>
	</li>
	<li>Sequencing.
	<ol>
		<li>For gene targeting, send PCR products to a Sanger sequencing service provider.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Ittner, L. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dendritic+function+of+tau+mediates+amyloid-beta+toxicity+in+Alzheimer's+disease+mouse+models.">Dendritic function of tau mediates amyloid-beta toxicity in Alzheimer's disease mouse models.</a> Cell. 142 (3), 387-397 (2010).</li><li>Ittner, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Site-specific+phosphorylation+of+tau+inhibits+amyloid-beta+toxicity+in+Alzheimer's+mice.">Site-specific phosphorylation of tau inhibits amyloid-beta toxicity in Alzheimer's mice.</a> Science. 354 (6314), 904-908 (2016).</li><li>Marantz Henig, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Monk in the Garden. , (2000).</li><li>Jaenisch, R., Mintz, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simian+virus+40+DNA+sequences+in+DNA+of+healthy+adult+mice+derived+from+preimplantation+blastocysts+injected+with+viral+DNA.">Simian virus 40 DNA sequences in DNA of healthy adult mice derived from preimplantation blastocysts injected with viral DNA.</a> Proc Natl Acad Sci U S A. 71 (4), 1250-1254 (1974).</li><li>Gordon, J. W., Ruddle, F. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integration+and+stable+germ+line+transmission+of+genes+injected+into+mouse+pronuclei.">Integration and stable germ line transmission of genes injected into mouse pronuclei.</a> Science. 214 (4526), 1244-1246 (1981).</li><li>Gordon, J. W., Scangos, G. A., Plotkin, D. J., Barbosa, J. A., Ruddle, F. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genetic+transformation+of+mouse+embryos+by+microinjection+of+purified+DNA.">Genetic transformation of mouse embryos by microinjection of purified DNA.</a> Proc Natl Acad Sci U S A. 77 (12), 7380-7384 (1980).</li><li>Brinster, R. L., Chen, H. Y., Trumbauer, M. E., Yagle, M. K., Palmiter, R. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Factors+affecting+the+efficiency+of+introducing+foreign+DNA+into+mice+by+microinjecting+eggs.">Factors affecting the efficiency of introducing foreign DNA into mice by microinjecting eggs.</a> Proc Natl Acad Sci U S A. 82 (13), 4438-4442 (1985).</li><li>Capecchi, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+targeting+in+mice:+functional+analysis+of+the+mammalian+genome+for+the+twenty-first+century.">Gene targeting in mice: functional analysis of the mammalian genome for the twenty-first century.</a> Nat Rev Genet. 6 (6), 507-512 (2005).</li><li>Carbery, I. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Targeted+genome+modification+in+mice+using+zinc-finger+nucleases.">Targeted genome modification in mice using zinc-finger nucleases.</a> Genetics. 186 (2), 451-459 (2010).</li><li>Sung, Y. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Knockout+mice+created+by+TALEN-mediated+gene+targeting.">Knockout mice created by TALEN-mediated gene targeting.</a> Nat Biotechnol. 31 (1), 23-24 (2013).</li><li>Jinek, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+programmable+dual-RNA-guided+DNA+endonuclease+in+adaptive+bacterial+immunity.">A programmable dual-RNA-guided DNA endonuclease in adaptive bacterial immunity.</a> Science. 337 (6096), 816-821 (2012).</li><li>Wang, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=One-step+generation+of+mice+carrying+mutations+in+multiple+genes+by+CRISPR/Cas-mediated+genome+engineering.">One-step generation of mice carrying mutations in multiple genes by CRISPR/Cas-mediated genome engineering.</a> Cell. 153 (4), 910-918 (2013).</li><li>Kang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Introducing+precise+genetic+modifications+into+human+3PN+embryos+by+CRISPR/Cas-mediated+genome+editing.">Introducing precise genetic modifications into human 3PN embryos by CRISPR/Cas-mediated genome editing.</a> J Assist Reprod Genet. 33 (5), 581-588 (2016).</li><li>Liang, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CRISPR/Cas9-mediated+gene+editing+in+human+tripronuclear+zygotes.">CRISPR/Cas9-mediated gene editing in human tripronuclear zygotes.</a> Protein Cell. 6 (5), 363-372 (2015).</li><li>Ittner, L. M., G&#246;tz, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pronuclear+injection+for+the+production+of+transgenic+mice.">Pronuclear injection for the production of transgenic mice.</a> Nat Protoc. 2 (5), 1206-1215 (2007).</li><li>Yang, H., Wang, H., Jaenisch, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generating+genetically+modified+mice+using+CRISPR/Cas-mediated+genome+engineering.">Generating genetically modified mice using CRISPR/Cas-mediated genome engineering.</a> Nat Protoc. 9 (8), 1956-1968 (2014).</li><li>. Resuspension Calculator Available from: <a target="_blank" href="https://sg.idtdna.com/calc/resuspension/">https://sg.idtdna.com/calc/resuspension/</a> (2017)</li><li>Auerbach, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strain-dependent+differences+in+the+efficiency+of+transgenic+mouse+production.">Strain-dependent differences in the efficiency of transgenic mouse production.</a> Transgenic Res. 12 (1), 59-69 (2003).</li><li>Merriman, J. A., Jennings, P. C., McLaughlin, E. A., Jones, K. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+aging+on+superovulation+efficiency,+aneuploidy+rates,+and+sister+chromatid+cohesion+in+mice+aged+up+to+15+months.">Effect of aging on superovulation efficiency, aneuploidy rates, and sister chromatid cohesion in mice aged up to 15 months.</a> Biol Reprod. 86 (2), 49 (2012).</li><li>Nakagawa, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultra-superovulation+for+the+CRISPR-Cas9-mediated+production+of+gene-knockout,+single-amino-acid-substituted,+and+floxed+mice.">Ultra-superovulation for the CRISPR-Cas9-mediated production of gene-knockout, single-amino-acid-substituted, and floxed mice.</a> Biol Open. 5 (8), 1142-1148 (2016).</li><li>Byers, S. L., Wiles, M. V., Dunn, S. L., Taft, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mouse+estrous+cycle+identification+tool+and+images.">Mouse estrous cycle identification tool and images.</a> PLoS One. 7 (4), e35538 (2012).</li><li>Whitten, W. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modification+of+the+oestrous+cycle+of+the+mouse+by+external+stimuli+associated+with+the+male.">Modification of the oestrous cycle of the mouse by external stimuli associated with the male.</a> J Endocrinol. 13 (4), 399-404 (1956).</li><li>Ye, S., Dhillon, S., Ke, X., Collins, A. R., Day, I. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+efficient+procedure+for+genotyping+single+nucleotide+polymorphisms.">An efficient procedure for genotyping single nucleotide polymorphisms.</a> Nucleic Acids Res. 29 (17), E88 (2001).</li><li>Yoshimi, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ssODN-mediated+knock-in+with+CRISPR-Cas+for+large+genomic+regions+in+zygotes.">ssODN-mediated knock-in with CRISPR-Cas for large genomic regions in zygotes.</a> Nat Commun. 7, 10431 (2016).</li><li>Suzuki, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+genome+editing+via+CRISPR/Cas9+mediated+homology-independent+targeted+integration.">In vivo genome editing via CRISPR/Cas9 mediated homology-independent targeted integration.</a> Nature. , (2016).</li><li>Soriano, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generalized+lacZ+expression+with+the+ROSA26+Cre+reporter+strain.">Generalized lacZ expression with the ROSA26 Cre reporter strain.</a> Nat Genet. 21, 70-71 (1999).</li><li>Liu, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+targeted+mutation+at+the+known+collagenase+cleavage+site+in+mouse+type+I+collagen+impairs+tissue+remodeling.">A targeted mutation at the known collagenase cleavage site in mouse type I collagen impairs tissue remodeling.</a> J Cell Biol. 130 (1), 227-237 (1995).</li><li>Ke, Y. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Short-term+suppression+of+A315T+mutant+human+TDP-43+expression+improves+functional+deficits+in+a+novel+inducible+transgenic+mouse+model+of+FTLD-TDP+and+ALS.">Short-term suppression of A315T mutant human TDP-43 expression improves functional deficits in a novel inducible transgenic mouse model of FTLD-TDP and ALS.</a> Acta Neuropathol. 130 (5), 661-678 (2015).</li><li>Auerbach, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Production+of+functional+transgenic+mice+by+DNA+pronuclear+microinjection.">Production of functional transgenic mice by DNA pronuclear microinjection.</a> Acta Biochim Pol. 51 (1), 9-31 (2004).</li><li>Iyer, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Off-target+mutations+are+rare+in+Cas9-modified+mice.">Off-target mutations are rare in Cas9-modified mice.</a> Nat Methods. 12 (6), 479 (2015).</li><li>Zhou, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+screening+of+a+CRISPR/Cas9+library+for+functional+genomics+in+human+cells.">High-throughput screening of a CRISPR/Cas9 library for functional genomics in human cells.</a> Nature. 509 (7501), 487-491 (2014).</li><li>Brinster, R. L., Chen, H. Y., Trumbauer, M. E., Avarbock, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Translation+of+globin+messenger+RNA+by+the+mouse+ovum.">Translation of globin messenger RNA by the mouse ovum.</a> Nature. 283 (5746), 499-501 (1980).</li><li>Pinkert, C. A., Irwin, M. H., Johnson, L. W., Moffatt, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondria+transfer+into+mouse+ova+by+microinjection.">Mitochondria transfer into mouse ova by microinjection.</a> Transgenic Res. 6 (6), 379-383 (1997).</li><li>Biggers, J. D., Summers, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Choosing+a+culture+medium:+making+informed+choices.">Choosing a culture medium: making informed choices.</a> Fertil Steril. 90 (3), 473-483 (2008).</li><li>Nakagata, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Embryo+transfer+through+the+wall+of+the+fallopian+tube+in+mice.">Embryo transfer through the wall of the fallopian tube in mice.</a> Jikken Dobutsu. 41 (3), 387-388 (1992).</li><li>Truett, G. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+PCR-quality+mouse+genomic+DNA+with+hot+sodium+hydroxide+and+tris+(HotSHOT).">Preparation of PCR-quality mouse genomic DNA with hot sodium hydroxide and tris (HotSHOT).</a> Biotechniques. 29 (1), 52-54 (2000).</li><li>Richardson, C. D., Ray, G., DeWitt, M. A., Curie, G. L., Corn, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enhancing+homology-directed+genome+editing+by+catalytically+active+and+inactive+CRISPR-Cas9+using+asymmetric+donor+DNA.">Enhancing homology-directed genome editing by catalytically active and inactive CRISPR-Cas9 using asymmetric donor DNA.</a> Nat Biotechnol. 34 (3), 339-344 (2016).</li><li>Delerue, F., Ittner, L. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome+Editing+in+Mice+Using+CRISPR/Cas9:+Achievements+and+Prospects.">Genome Editing in Mice Using CRISPR/Cas9: Achievements and Prospects.</a> Clon. Transgen. 4, (2015).</li></ol>

The authors provide academic transgenesis services in mice via the University of New South Wales Mark Wainwright Analytical Centre.

Critical steps within the protocol
The generation of genetically modified mice is known to be technically challenging. However, the protocol presented here is an optimized and simplified method that allows one to master and troubleshoot the technique in record time. There are two steps necessary for the successful completion of the technique. First, the synthesis of linear DNA templates (for the synthesis of sgRNAs) can be achieved without magnesium chloride (MgCl2). However, it is hig...

Animal models, both in vertebrates and invertebrates, have been instrumental to examining the pathophysiology of human conditions such as Alzheimer&#39;s disease1,2. They are also invaluable tools to search for disease modifiers and to ultimately develop novel treatment strategies in the hope of a cure. Although each model has intrinsic limitations, the use of animals as entire systemic models is vital to biomedical research. This is because the metabolic and complex physiological environment cannot be entirely simulated in tissue culture.
To date, the mouse remains the most common mammalian species used for genetic manipulation because it features several advantages. The physiological processes and genes associated with diseases are highly conserved between mice and humans. The mouse was the first mammal to have its full genome sequenced (2002), one year before the human genome (2003). Aside from this wealth of genetic information, the mouse has good breeding capacities, a fast development cycle (6 weeks from fertilization to weaning), and a reasonable size. All these advantages, coupled with physiological indicators, such as distinct coat colors (required for crossing strategies), made the mouse an attractive model for genetic manipulation. Notably, in the very early age of modern genetics, Gregor Mendel started working on mice before moving to plants3.
Gene transfer techniques resulted in the generation of the first transgenic mouse over three decades ago4, initially created using viral delivery. However, researchers soon realized that one of the main challenges of mouse transgenesis was the inability to control the fate of the exogenous DNA. Because the viral delivery of transgenes into mouse oocytes resulted in multiple copies integrated randomly into the genome, the possibility of establishing subsequent transgenic lines was limited.
One such limitation was overcome when Gordon et al. generated the first transgenic mouse line by microinjection5,6. This began the era of recombinant DNA technology, and the parameters influencing the outcome of a microinjection session have been widely studied7. Although microinjection does not allow for control over the integration site of the transgene (which eventually results in specific expression levels for each founder mouse), the main advantage of pronuclear microinjection remains the formation of concatemers (i.e., arrays of multiple copies of the transgene, linked in series) before genomic integration5. This characteristic has been used over the years to establish thousands of transgenic mouse lines that overexpress a gene of interest. Since then, transgenesis, the artificial modification of an organism&#39;s genome, has been extensively used to identify the role of single genes in the occurrence of diseases.
A further key achievement in manipulating the mouse genome was reached when Mario Capecchi successfully disrupted a single gene in the mouse, opening the era of gene targeting8. However, major drawbacks quickly emerged from ES cell-based gene targeting, including the challenges of culturing ES cells, the somewhat variable degree of chimerism, and the length of the process (i.e., 12-18 months, minimum, to obtain the mouse).
Recently, advances in new technologies, such as engineered endonucleases (e.g., zinc finger nucleases (ZFN), transcription activator-like effector nucleases (TALEN), and clustered regularly interspaced short palindromic repeats (CRISPR/Cas9)) have emerged as alternative methods to accelerate the process of gene targeting in mice9,10. These endonucleases can readily be injected into mouse oocytes by microinjection, allowing for the generation of gene-targeted mice in as little as 6 weeks.
Since the first report on the use of CRISPR for genome editing11, this bacterial adaptive immune system has superseded ZFN and TALEN because of its many advantages, including the ease of synthesis and the ability to target multiple loci at once (referred to as &#34;multiplexing&#34;). CRISPR was first used for gene targeting in mice12 and has since been applied to countless species, from plants to humans13,14. To date, there is no report of a single species resistant to CRISPR genome editing.
The two main limiting steps of the generation of transgenic mice are the injection of oocytes and the reimplantation of these oocytes into pseudo-pregnant females. Although this technique has been described by us15 and others16, recent technical improvements in mouse embryology and gene transfer techniques have revolutionized the process of generating genetically modified mice. These improvements will be described herein.

<table><tbody><tr><td>Micropipette 0.1-2.5 &amp;mu;L</td><td>Eppendorf</td><td>4920000016</td><td></td></tr><tr><td>Micropipette 2 - 20 &amp;mu;L</td><td>Eppendorf</td><td>4920000040</td><td></td></tr><tr><td>Micropipette 20 - 200 &amp;mu;L</td><td>Eppendorf</td><td>4920000067</td><td></td></tr><tr><td>Micropipette 100 - 1,000 &amp;mu;L</td><td>Eppendorf</td><td>4920000083</td><td></td></tr><tr><td>Molecular weight marker&amp;nbsp;</td><td>Bioline</td><td>BIO-33025</td><td>HyperLadder 1 kb</td></tr><tr><td>Molecular weight marker&amp;nbsp;</td><td>Bioline</td><td>BIO-33056</td><td>HyperLadder 100 bp</td></tr><tr><td>Agarose</td><td>Bioline</td><td>BIO-41025</td><td></td></tr><tr><td>EDTA buffer</td><td>Sigma-Aldrich</td><td>93296</td><td>10x - Dilute to 1x</td></tr><tr><td>Ethidium bromide</td><td>Thermo Fisher Scientific</td><td>15585011</td><td></td></tr><tr><td>SYBR Safe gel stain</td><td>Invitrogen</td><td>S33102</td><td></td></tr><tr><td>Gel extraction kit</td><td>Qiagen</td><td>28706</td><td></td></tr><tr><td>PCR purification kit (Qiaquick)</td><td>Qiagen</td><td>28106</td><td></td></tr><tr><td>Vacuum system (Manifold)</td><td>Promega</td><td>A7231</td><td></td></tr><tr><td>Nuclease-free microinjection buffer&amp;nbsp;</td><td>Millipore</td><td>MR-095-10F</td><td></td></tr><tr><td>Ultrafree-MC microcentrifuge filter&amp;nbsp;</td><td>Millipore</td><td>UFC30GV00</td><td></td></tr><tr><td>Cas9 mRNA</td><td>Sigma-Aldrich</td><td>CAS9MRNA</td><td></td></tr><tr><td>CRISPR expressing plasmid (px330)</td><td>Addgene</td><td>42230</td><td></td></tr><tr><td>Nuclease free water</td><td>Sigma-Aldrich</td><td>W4502</td><td></td></tr><tr><td>Phusion polymerase</td><td>New England Biolabs</td><td>M0530L</td><td></td></tr><tr><td>T7 Quick High Yield RNA kit</td><td>New England Biolabs</td><td>E2050S</td><td></td></tr><tr><td>RNA purification spin columns (NucAway)</td><td>Thermo Fisher Scientific</td><td>AM10070</td><td></td></tr><tr><td>ssOligos</td><td>Sigma-Aldrich</td><td>OLIGO STANDARD</td><td></td></tr><tr><td>Donor plasmid</td><td>Thermo Fisher Scientific</td><td>GeneArt</td><td></td></tr><tr><td>Hyaluronidase</td><td>Sigma-Aldrich</td><td>H3884</td><td></td></tr><tr><td>KSOMaa embryo culture medium</td><td>Zenith Biotech&amp;nbsp;</td><td>ZEKS-100</td><td></td></tr><tr><td>Mineral oil</td><td>Zenith Biotech&amp;nbsp;</td><td>ZSCO-100</td><td></td></tr><tr><td>M2 Medium</td><td>Sigma-Aldrich</td><td>M7167</td><td></td></tr><tr><td>Cytochalasin B</td><td>Sigma-Aldrich</td><td>C6762</td><td></td></tr><tr><td>Mouthpiece</td><td>Sigma-Aldrich</td><td>A5177</td><td></td></tr><tr><td>Glass microcapillaries</td><td>Sutter Instrument</td><td>BF100-78-10</td><td></td></tr><tr><td>Proteinase K</td><td>Applichem</td><td>A3830.0100</td><td></td></tr><tr><td>Dumont #5 forceps</td><td>Fine Science Tools&amp;nbsp;</td><td>91150-20</td><td></td></tr><tr><td>Iris scissors</td><td>Fine Science Tools&amp;nbsp;</td><td>91460-11</td><td></td></tr><tr><td>Vessel clamp</td><td>Fine Science Tools&amp;nbsp;</td><td>18374-43</td><td></td></tr><tr><td>Wound clips&amp;nbsp;</td><td>Fine Science Tools&amp;nbsp;</td><td>12040-01</td><td></td></tr><tr><td>Clips applier&amp;nbsp;</td><td>Fine Science Tools&amp;nbsp;</td><td>12018-12</td><td></td></tr><tr><td>Micro-scissors&amp;nbsp;</td><td>Fine Science Tools&amp;nbsp;</td><td>15000-03</td><td></td></tr><tr><td>Cauterizer</td><td>Fine Science Tools&amp;nbsp;</td><td>18000-00</td><td></td></tr><tr><td>Non-absorbable surgical sutures (Ethilon 3-0)</td><td>Ethicon</td><td>1691H</td><td></td></tr><tr><td>5% CO&lt;sub&gt;2&lt;/sub&gt; incubator</td><td>MG Scientific</td><td>Galaxy 14S</td><td></td></tr><tr><td>Spectrophotometer</td><td>Thermo Fisher Scientific</td><td>Nanodrop 2000c</td><td></td></tr><tr><td>Thermocycler</td><td>Eppendorf</td><td>6321 000.515</td><td></td></tr><tr><td>Electrophoresis set up</td><td>BioRad</td><td>1640300</td><td></td></tr><tr><td>UV Transilluminator</td><td>BioRad</td><td>1708110EDU</td><td></td></tr><tr><td>Thermocycler</td><td>Eppendorf</td><td>6334000069</td><td></td></tr><tr><td>Stereoscopic microscope</td><td>Olympus</td><td>SZX7</td><td></td></tr><tr><td>Inverted microscope</td><td>Olympus</td><td>IX71</td><td></td></tr><tr><td>2x Micromanipulators</td><td>Eppendorf</td><td>5188000.012</td><td></td></tr><tr><td>Oocytes manipulator</td><td>Eppendorf</td><td>5176000.025</td><td></td></tr><tr><td>Microinjector (Femtojet)</td><td>Eppendorf</td><td>5247000.013</td><td></td></tr><tr><td>Mice C57BL/6J strain</td><td>Australian BioResources</td><td>C57BL/6JAusb&amp;nbsp;</td><td></td></tr></tbody></table>

generation of genetically modified mice through the microinjection of oocytes

The use of genetically modified mice has significantly contributed to studies on both physiological and pathological in vivo processes. The pronuclear injection of DNA expression constructs into fertilized oocytes remains the most commonly used technique to generate transgenic mice for overexpression. With the introduction of CRISPR technology for gene targeting, pronuclear injection into fertilized oocytes has been extended to the generation of both knockout and knockin mice. This work describes the preparation of DNA for injection and the generation of CRISPR guides for gene targeting, with a particular emphasis on quality control. The genotyping procedures required for the identification of potential founders are critical. Innovative genotyping strategies that take advantage of the "multiplexing" capabilities of CRISPR are presented herein. Surgical procedures are also outlined. Together, the steps of the protocol will allow for the generation of genetically modified mice and for the subsequent establishment of mouse colonies for a plethora of research fields, including immunology, neuroscience, cancer, physiology, development, and others.

Below, the workflows for microinjection in the case of random integration and CRISPR-mediated gene targeting are described (Figure 1).
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/55765/55765fig1v2.jpg" /> 
Figure 1: Typical Workflow for the Generation of Genetically Modified Mice. For random integration, the purified transgene is injected into the pronucleus of f...

Watch this Scientific Journal Video about Generation of Genetically Modified Mice through the Microinjection of Oocytes at JoVE.com

Generation of Genetically Modified Mice through the Microinjection of Oocytes

The microinjection of mouse oocytes is commonly used for both classic transgenesis (i.e., the random integration of transgenes) and CRISPR-mediated gene targeting. This protocol reviews the latest developments in microinjection, with a particular emphasis on quality control and genotyping strategies.

The use of genetically modified mice has significantly contributed to studies on both physiological and pathological in vivo processes. The pronuclear ...

generation-genetically-modified-mice-through-microinjection

Universidad San Sebastian

Research

JoVE Journal

Developmental Biology

20.5K Views.  University of New South Wales. The microinjection of mouse oocytes is commonly used for both classic transgenesis (i.e., the random integration of transgenes) and CRISPR-mediated gene targeting. This protocol reviews the latest developments in microinjection, with a particular emphasis on quality control and genotyping strategies.

Video: Generation of Genetically Modified Mice through the Microinjection of Oocytes

Loss- and Gain-of-function Approach to Investigate Early Cell Fate Determinants in Preimplantation Mouse Embryos

Gene silencing and overexpression techniques are instrumental for the identification of genes involved in embryonic development. Direct target gene modification in preimplantation embryos provides a means to study the underlying mechanisms of genes implicated in, for instance, cellular differentiation into the trophectoderm (TE) and the inner cell mass (ICM). Here, we describe a protocol that examines the role of neogenin as an authentic receptor for initial cell fate determination in preimplantation mouse embryos. First, we discuss the experimental manipulations that were used to produce gain and loss of neogenin function by microinjecting neogenin cDNA and shRNA; the effectiveness of this approach was confirmed by a strong correlation between the pair-wise expression levels of either red fluorescent protein (RFP) or green fluorescent protein (GFP) and the immunocytochemical quantification of neogenin expression. Secondly, overexpression of neogenin in preimplantation mouse embryos leads to normal ICM development while neogenin knockdown causes the ICM to develop abnormally, implying that neogenin could be a receptor that relays extracellular cues to drive blastomeres to early cell fates. Given the success of this detailed protocol in investigating the function of a novel embryonic developmental stage-specific receptor, we propose that it has the potential to aid in exploration and identification of other stage-specific genes during embryogenesis.

The goal of this protocol is to describe a loss- and gain-of function method that is applicable to identify neogenin as a stage-specific receptor that leads to trophectoderm and inner cell mass differentiation in preimplantation mouse embryos.

 Gene silencing and overexpression techniques are instrumental for the identification of genes involved in embryonic development. Direct target gene ...

Using Mouse Oocytes to Assess Human Gene Function During Meiosis I

Embryonic aneuploidy is the major genetic cause of infertility in humans. Most of these events originate during female meiosis, and albeit positively correlated with maternal age, age alone is not always predictive of the risk of generating an aneuploid embryo. Therefore, gene variants might account for incorrect chromosome segregation during oogenesis. Given that access to human oocytes is limited for research purposes, a series of assays were developed to study human gene function during meiosis I using mouse oocytes. First, messenger RNA (mRNA) of the gene and gene variant of interest are microinjected into prophase I-arrested mouse oocytes. After allowing time for expression, oocytes are synchronously released into meiotic maturation to complete meiosis I. By tagging the mRNA with a sequence of a fluorescent reporter, such as green fluorescent protein (Gfp), the localization of the human protein can be assessed in addition to the phenotypic alterations. For example, gain or loss of function can be investigated by establishing experimental conditions that challenge the gene product to fix meiotic errors. Although this system is advantageous in investigating human protein function during oogenesis, adequate interpretation of results should be undertaken given that protein expression is not at endogenous levels and, unless controlled for (i.e. knocked out or down), murine homologs are also present in the system.

As the genetic variants associated with human disease begin to become uncovered, it is becoming increasingly important to develop systems with which to rapidly evaluate the biological significance of those identified variants. This protocol describes methods for evaluating human gene function during female meiosis I using mouse oocytes.

Embryonic aneuploidy is the major genetic cause of infertility in humans. Most of these events originate during female meiosis, and albeit positively ...

Genetics

Lentiviral Mediated Production of Transgenic Mice: A Simple and Highly Efficient Method for Direct Study of Founders

For almost 40 years, pronuclear DNA injection represents the standard method to generate transgenic mice with random integration of transgenes. Such a routine procedure is widely utilized throughout the world and its main limitation resides in the poor efficacy of transgene integration, resulting in a low yield of founder animals. Only few percent of animals born after implantation of injected fertilized oocytes have integrated the transgene. In contrast, lentiviral vectors are powerful tools for integrative gene transfer and their use to transduce fertilized oocytes allows highly efficient production of founder transgenic mice with an average yield above 70%. Furthermore, any mouse strain can be used to produce transgenic animal and the penetrance of transgene expression is extremely high, above 80% with lentiviral mediated transgenesis compared to DNA microinjection. The size of the DNA fragment that can be cargo by the lentiviral vector is restricted to 10 kb and represents the major limitation of this method. Using a simple and easy to perform injection procedure beneath the zona pellucida of fertilized oocytes, more than 50 founder animals can be produced in a single session of microinjection. Such a method is highly adapted to perform, directly in founder animals, rapid gain and loss of function studies or to screen genomic DNA regions for their ability to control and regulate gene expression in vivo.

Here, we present a protocol to promote transgene integration and production of founder transgenic mice with high efficacy by a simple injection of a lentiviral vector in the perivitelline space of a fertilized oocyte.

For almost 40 years, pronuclear DNA injection represents the standard method to generate transgenic mice with random integration of transgenes. Such a ...

Use of Freeze-thawed Embryos for High-efficiency Production of Genetically Modified Mice

The use of genetically modified (GM) mice has become crucial for understanding gene function and deciphering the underlying mechanisms of human diseases. The CRISPR/Cas9 system allows researchers to modify the genome with unprecedented efficiency, fidelity, and simplicity. Harnessing this technology, researchers are seeking a rapid, efficient, and easy protocol for generating GM mice. Here we introduce an improved method for cryopreservation of one-cell embryos that leads to a higher developmental rate of the freeze-thawed embryos. By combining it with optimized electroporation conditions, this protocol allows for the generation of knockout and knock-in mice with high efficiency and low mosaic rates within a short time. Furthermore, we show a step-by-step explanation of our optimized protocol, covering CRISPR reagent preparation, in vitro fertilization, cryopreservation and thawing of one-cell embryos, electroporation of CRISPR reagents, mouse generation, and genotyping of the founders. Using this protocol, researchers should be able to prepare GM mice with unparalleled ease, speed, and efficiency.

Here, we present a modified method for cryopreservation of one-cell embryos as well as a protocol that couples the use of freeze-thawed embryos and electroporation for the efficient generation of genetically modified mice.

The use of genetically modified (GM) mice has become crucial for understanding gene function and deciphering the underlying mechanisms of human diseases. ...

Somatic Genome-Engineered Mouse Models Using In Vivo Microinjection and Electroporation

Germline genetically engineered mouse models (G-GEMMs) have provided valuable insight into in vivo gene function in development, homeostasis, and disease. However, the time and cost associated with colony creation and maintenance are high. Recent advances in CRISPR-mediated genome editing have allowed the generation of somatic GEMMs (S-GEMMs) by directly targeting the cell/tissue/organ of interest.
The oviduct, or fallopian tube in humans, is considered the tissue-of-origin of the most common ovarian cancer, high-grade serous ovarian carcinomas (HGSCs). HGSCs initiate in the region of the fallopian tube distal to the uterus, located adjacent to the ovary, but not the proximal fallopian tube. However, traditional mouse models of HGSC target the entire oviduct, and thus do not recapitulate the human condition. We present a method of DNA, RNA, or ribonucleoprotein (RNP) solution microinjection into the oviduct lumen and in vivo electroporation to target mucosal epithelial cells in restricted regions along the oviduct. There are several advantages of this method for cancer modeling, such as 1) high adaptability in targeting the area/tissue/organ and region of electroporation, 2) high flexibility in targeted cell types (cellular pliancy) when used in combination with specific promoters for Cas9 expression, 3) high flexibility in the number of electroporated cells (relatively low frequency), 4) no specific mouse line is required (immunocompetent disease modeling), 5) high flexibility in gene mutation combination, and 6) possibility of tracking electroporated cells when used in combination with a Cre reporter line. Thus, this cost-effective method recapitulates human cancer initiation.

Somatic Genome-Engineered Mouse Models Using In Vivo Microinjection and Electroporation

This protocol describes microinjection and in vivo electroporation for regionally restricted CRISPR-mediated genome editing in the mouse oviduct.

Germline genetically engineered mouse models (G-GEMMs) have provided valuable insight into in vivo gene function in development, homeostasis, and disease. ...

Cancer Research

Zygote Microinjection for Creating Gene Cassette Knock-in and Flox Alleles in Mice

CRISPR-Cas technology has enabled the rapid and effortless generation of genetically modified mice. Specifically, mice and point mutant mice are readily produced by electroporation of CRISPR factors (and single-stranded oligo DNA donors) into the zygote. In contrast, gene cassette (&#62;1 kb) knock-in and floxed mice are mainly generated by microinjection of CRISPR factors and double-stranded DNA donors into zygotes. Genome editing technologies have also increased the flexibility of genetically modified mice production. It is now possible to introduce the intended mutations in the target genomic regions in a number of beneficial inbred mouse strains. Our team has produced over 200 gene cassette knock-in mouse lines, and over 110 floxed mouse lines by zygote microinjection of CRISPR-Cas9 following requests from several countries, including Japan. Some of these genome editing used BALB/c, C3H/HeJ, and C57BL/6N inbred strains, however most used C57BL/6J. Unlike the electroporation method, genome editing by zygote microinjection in various inbred strains of mice is not that easy. However, gene cassette knock-in and floxed mice on single inbred genetic backgrounds are as critical as genetic humanized, fluorescent reporter, and conditional knockout mouse models. Therefore, this article presents the protocol for the zygote microinjection of CRISPR factors and double-stranded DNA donors in C57BL/6J mice for generating gene cassette knock-in and floxed mice. This article exclusively focuses on nuclear injection rather than cytoplasmic injection. In addition to zygote microinjection, we outline the timeline for the production process and peripheral techniques such as induction of superovulation and embryo transfer.

The present protocol describes zygote microinjection of CRISPR-Cas9 and donor DNA to efficiently produce gene cassette knock-in and floxed mice.

CRISPR-Cas technology has enabled the rapid and effortless generation of genetically modified mice. Specifically, mice and point mutant mice are readily ...

Murine Round Spermatid Injection Procedure to Study Embryonic Development

Mouse Round Spermatid Injection

Round spermatids, characterized by their haploid genetic content, represent the precursor cells to mature spermatozoa. Through the innovative technique of round spermatid injection (ROSI), oocytes can be successfully fertilized and developed into viable fetuses. In a groundbreaking milestone achieved in 1995, the first mouse fetus was born through ROSI technology. ROSI has since emerged as a pivotal tool for unraveling the intricate mechanisms governing embryonic development and holds significant potential in various applications, including the acceleration of mouse generation and the production of genetically modified mice. In 1996, a milestone was reached when the first human fetus was born through ROSI technology. However, the clinical applications of this method have shown a fluctuating pattern of success and failure. To date, ROSI technology has not found widespread application in clinical practice, primarily due to its low birth efficiency and insufficient validation of fetal safety. This article provides a comprehensive account of the precise methods of performing ROSI in mice, aiming to shed new light on basic research and its potential clinical applications.

Here, we introduce a method for performing round spermatid injection (ROSI) in mice, a technique with promising clinical applications and utility for investigating the mechanisms underlying embryonic development.

Round spermatids, characterized by their haploid genetic content, represent the precursor cells to mature spermatozoa. Through the innovative technique of ...

Mouse Oocyte Microinjection, Maturation and Ploidy Assessment

Mistakes in chromosome segregation lead to aneuploid cells. In somatic cells, aneuploidy is associated with cancer but in gametes, aneuploidy leads to infertility, miscarriages or developmental disorders like Down syndrome. Haploid gametes form through species-specific developmental programs that are coupled to meiosis. The first meiotic division (MI) is unique to meiosis because sister chromatids remain attached while homologous chromosomes are segregated. For reasons not fully understood, this reductional division is prone to errors and is more commonly the source of aneuploidy than errors in meiosis II (MII) or than errors in male meiosis 1,2. 
In mammals, oocytes arrest at prophase of MI with a large, intact germinal vesicle (GV; nucleus) and only resume meiosis when they receive ovulatory cues. Once meiosis resumes, oocytes complete MI and undergo an asymmetric cell division, arresting again at metaphase of MII. Eggs will not complete MII until they are fertilized by sperm. Oocytes also can undergo meiotic maturation using established in vitro culture conditions 3. Because generation of transgenic and gene-targeted mouse mutants is costly and can take long periods of time, manipulation of female gametes in vitro is a more economical and time-saving strategy. 
Here, we describe methods to isolate prophase-arrested oocytes from mice and for microinjection. Any material of choice may be introduced into the oocyte, but because meiotically-competent oocytes are transcriptionally silent 4,5 cRNA, and not DNA, must be injected for ectopic expression studies. To assess ploidy, we describe our conditions for in vitro maturation of oocytes to MII eggs. Historically, chromosome-spreading techniques are used for counting chromosome number 6. This method is technically challenging and is limited to only identifying hyperploidies. Here, we describe a method to determine hypo-and hyperploidies using intact eggs 7-8. This method uses monastrol, a kinesin-5 inhibitor, that collapses the bipolar spindle into a monopolar spindle 9 thus separating chromosomes such that individual kinetochores can readily be detected and counted by using an anti-CREST autoimmune serum. Because this method is performed in intact eggs, chromosomes are not lost due to operator error.

Oocytes are prone to aneuploidy due to errors in chromosome segregation during meiotic maturation. Aneuploid eggs can cause infertility, miscarriages or developmental disorders like Down syndrome. Here, we describe methods to introduce materials of choice into oocytes and methods to study meiotic maturation and assess ploidy.

Mistakes in chromosome segregation lead to aneuploid cells.  In somatic cells, aneuploidy is associated with cancer but in gametes, aneuploidy leads to ...

Biology

Mouse Genome Engineering Using Designer Nucleases

Transgenic mice carrying site-specific genome modifications (knockout, knock-in) are of vital importance for dissecting complex biological systems as well as for modeling human diseases and testing therapeutic strategies. Recent advances in the use of designer nucleases such as zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) 9 system for site-specific genome engineering open the possibility to perform rapid targeted genome modification in virtually any laboratory species without the need to rely on embryonic stem (ES) cell technology. A genome editing experiment typically starts with identification of designer nuclease target sites within a gene of interest followed by construction of custom DNA-binding domains to direct nuclease activity to the investigator-defined genomic locus. Designer nuclease plasmids are in vitro transcribed to generate mRNA for microinjection of fertilized mouse oocytes. Here, we provide a protocol for achieving targeted genome modification by direct injection of TALEN mRNA into fertilized mouse oocytes.

Designer nucleases such as zinc finger nucleases (ZFNs) and transcription activator-like effector nucleases (TALENs) can be used to modify the genome of mouse preimplantation embryos by triggering both the nonhomologous end joining (NHEJ) and homologous recombination (HR) pathways. These advances enable the rapid generation of mice with precise genetic modifications.

Transgenic mice carrying site-specific genome modifications (knockout, knock-in) are of vital importance for dissecting complex biological systems as well ...

Meiotic Spindle Assessment in Mouse Oocytes by siRNA-mediated Silencing

Errors in chromosome segregation during meiotic division in gametes can lead to aneuploidy that is subsequently transmitted to the embryo upon fertilization. The resulting aneuploidy in developing embryos is recognized as a major cause of pregnancy loss and congenital birth defects such as Down&#8217;s syndrome. Accurate chromosome segregation is critically dependent on the formation of the microtubule spindle apparatus, yet this process remains poorly understood in mammalian oocytes. Intriguingly, meiotic spindle assembly differs from mitosis and is regulated, at least in part, by unique microtubule organizing centers (MTOCs). Assessment of MTOC-associated proteins can provide valuable insight into the regulatory mechanisms that govern meiotic spindle formation and organization. Here, we describe methods to isolate mouse oocytes and deplete MTOC-associated proteins using a siRNA-mediated approach to test function. In addition, we describe oocyte fixation and immunofluorescence analysis conditions to evaluate meiotic spindle formation and organization.

Here, we present a protocol for specific siRNA-mediated mRNA depletion followed by immunofluorescence analysis to evaluate meiotic spindle assembly and organization in mouse oocytes. This protocol is suitable for in vitro depletion of transcripts and functional assessment of different spindle and/or MTOC-associated factors in oocytes.

Generation of Genetically Modified Mice through the Microinjection of Oocytes

Summary

Explore More Videos

Chapters in this video

Loss- and Gain-of-function Approach to Investigate Early Cell Fate Determinants in Preimplantation Mouse Embryos

Using Mouse Oocytes to Assess Human Gene Function During Meiosis I

Lentiviral Mediated Production of Transgenic Mice: A Simple and Highly Efficient Method for Direct Study of Founders

Use of Freeze-thawed Embryos for High-efficiency Production of Genetically Modified Mice

Somatic Genome-Engineered Mouse Models Using In Vivo Microinjection and Electroporation

Zygote Microinjection for Creating Gene Cassette Knock-in and Flox Alleles in Mice

Mouse Round Spermatid Injection

Mouse Oocyte Microinjection, Maturation and Ploidy Assessment

Mouse Genome Engineering Using Designer Nucleases

Meiotic Spindle Assessment in Mouse Oocytes by siRNA-mediated Silencing