JoVE Logo

Sign In

Chapter 22

Shearing Stresses in Beams and Thin-Walled Members

גזירה על הצד האופקי של אלמנט הקורה
גזירה על הצד האופקי של אלמנט הקורה
A prismatic beam's small element acted upon by vertical and horizontal shearing forces, along with normal forces, is considered for analyzing shear on ...
התפלגות מאמצים בקורה מלבנית צרה
התפלגות מאמצים בקורה מלבנית צרה
An elemental section of a beam is considered to analyze the distribution of the stresses. The magnitude of the shearing force exerted on the horizontal ...
מאמצי גזירה בקורה: פתרון בעיות
מאמצי גזירה בקורה: פתרון בעיות
A cantilever beam with a rectangular cross-section is subjected to distributed and point loads. To calculate shearing stress in the beam, the loads acting ...
עיוותים פלסטיים
עיוותים פלסטיים
A cantilever beam, when subjected to a load at its free end, develops the maximum bending moment at its fixed end. Until the bending moment surpasses the ...
העמסה לא סימטרית של איברים בעלי דפנות דקות
העמסה לא סימטרית של איברים בעלי דפנות דקות
When thin-walled members with non-symmetrical cross-sections are subjected to unsymmetric loading, they experience bending and twisting. This dual effect ...
העמסה לא סימטרית של איברים בעלי דפנות דקות: פתרון בעיות
העמסה לא סימטרית של איברים בעלי דפנות דקות: פתרון בעיות
Determine the shear center of the given channel section having a known uniform thickness, height, and width.  The first step in determining the shear ...
JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved