Name: a rapid technique for the visualization of live immobilized yeast cells
Uploaded: 2006-11-09T00:00:00.000+00:00
Duration: 2 min 54 s
Description: Watch this Scientific Journal Video about A Rapid Technique for the Visualization of Live Immobilized Yeast Cells at JoVE.com

我们要感谢他们的帮助皮特休斯敦和尤金妮亚徐。

<ol><li>时间当然epifluorescence显微镜固定化细胞。请注意，这个协议是唯一有用的，如果您的显微镜物镜低于显微镜阶段。 </li><li>在液体介质中的浓度所需的位置细胞长盖玻片（大约24x50mm） </li><li>切割的一种人工合成的介质板（这些具有较低的自体荧光）和地点在细胞所需的大小的琼脂块。广场一侧的镊子处理与细胞接触的琼脂块。 </li><li>对于较短时间的课程（最多3个小时），这个成立就足够了。如果细胞是动时，在显微镜观察，减少细胞或增加面积的琼脂块的体积。 </li><li>对于更长的时间课程，放在琼脂块上下降了新鲜的液体介质，并将其置于载玻片上的琼脂块的顶部。这张幻灯片减少通过琼脂块顶部的蒸发。如果需要，可以用凡士林密封，以进一步减少水分与盖玻片接触的琼脂块的边缘。我已经使用这个设置为电影长达9小时长，与野生型速率分裂的细胞。 </li></ol>

<ol>
	<li>Xu, E. Y., Zawadzki, K. A., Broach, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-cell+observations+reveal+intermediate+transcriptional+silencing+states.">Single-cell observations reveal intermediate transcriptional silencing states.</a> Mol. Cell. 23, 219-229 (2006).</li></ol>

The authors have nothing to disclose.

这是一种快速的技术，无法移动，酵母细胞中，而仍然允许增长。我们遵循长达十几个小时的酵母生长，与酵母在整个实验过程中显示野生型分工率。请注意，此安装需要的物镜显微镜下面的阶段。

a rapid technique for the visualization of live immobilized yeast cells

我们在座的一个epifluorescence显微镜日益增长的酵母细胞固定化和可视化的简单，快速，和极其灵活的技术。该技术同样适用于静态的酵母种群，或时间制课程实验达10个小时的长度可视化。我的显微镜调查在沉默交配基因在酿酒酵母中的后生继承。有两个位点的沉默交配，HML和HMR的，通常不会表达，因为它们是在异包装的。在sir1突变的背景沉默减弱等，每个座位可以表达或沉默的后生状态，所以在人口作为一个整体有一个HML和HMR的后生国家不同的细胞混合。我的显微镜证明在单个细胞之间的HML和HMR的后生状态，没有关系。 sir1细胞随机开关后生国家，建立在先前表示的轨迹沉默或表达了先前沉默的轨迹。我的时间当然显微镜跟踪个人sir1细胞和他们的后代将比分四种可能的后生开关频率，因此每个sir1细胞后生国家的稳定。也许等。分子。细胞2006年。

Watch this Scientific Journal Video about A Rapid Technique for the Visualization of Live Immobilized Yeast Cells at JoVE.com

A Rapid Technique for the Visualization of Live Immobilized Yeast Cells

一个快速增长的固定化酵母细胞的可视化技术，在这里沉默交配位点HML和HMR的荧光灯记者

一个现场的固定化酵母细胞可视化的快速技术

We present here a simple, rapid, and extremely flexible technique for the immobilization and visualization of growing yeast cells by epifluorescence ...

The aim of the Experiment is to be able to follow a population of providing sir one cells under the microscope so that I can see how the epigenetics states change how often the epigene states change with each, with each successive division of the cells, take a long cover slip, take about seven microliters of cells, place on the long cover slip and use a com, a synthetic media plate. Take a razor blade and then make cuts into the agar. So take an agar block, lift it up and place over the cells.Okay, for short term experiments, up to three hours. This by itself is fine. The cells will be immobilized for longer term experiments, I add li liquid medium to the top of the agar pad, and then put a glass slide over top of the whole thing.The media will provide us like a seal between the two. The, the slide is solely to prevent evaporation from the top of the of the agar block. So with this setup, the egger block will remain moist and the cells will continue dividing for up to eight, at least up to eight hours.

a-rapid-technique-for-visualization-live-immobilized-yeast

Nanyang Technological University

Research

JoVE Journal

Biology

10.3K 次观看.  Princeton University. The aim of the Experiment is to be able to follow a population of providing sir one cells under the microscope so that I can see how the epigenetics states change how often the epigene states change with each, with each successive division of the cells, take a long cover slip, take about seven microliters of cells, place on the long cover slip and use a com, a synthetic media plate. Take a razor blade and then make cuts into the agar. So take an agar block, lift it up and place over the cells...

视频: A Rapid Technique for the Visualization of Live Immobilized Yeast Cells

Visualization of Cortex Organization and Dynamics in Microorganisms, using Total Internal Reflection Fluorescence Microscopy

TIRF microscopy has emerged as a powerful imaging technology to study spatio-temporal dynamics of fluorescent molecules in vitro and in living cells1. The optical phenomenon of total internal reflection occurs when light passes from a medium with high refractive index into a medium with low refractive index at an angle larger than a characteristic critical angle (i.e. closer to being parallel with the boundary). Although all light is reflected back under such conditions, an evanescent wave is created that propagates across and along the boundary, which decays exponentially with distance, and only penetrates sample areas that are 100-200 nm near the interface2. In addition to providing superior axial resolution, the reduced excitation of out of focus fluorophores creates a very high signal to noise ratios and minimizes damaging effects of photobleaching2,3. Being a widefield technique, TIRF also allows faster image acquisition than most scanning based confocal setups.
At first glance, the low penetration depth of TIRF seems to be incompatible with imaging of bacterial and fungal cells, which are often surrounded by thick cell walls. On the contrary, we have found that the cell walls of yeast and bacterial cells actually improve the usability of TIRF and increase the range of observable structures4-8. Many cellular processes can therefore be directly accessed by TIRF in small, single-cell microorganisms, which often offer powerful genetic manipulation techniques. This allows us to perform in vivo biochemistry experiments, where kinetics of protein interactions and activities can be directly assessed in living cells.
We describe here the individual steps required to obtain high quality TIRF images for Saccharomyces cerevisiae or Bacillus subtilis cells. We point out various problems that can affect TIRF visualization of fluorescent probes in cells and illustrate the procedure with several application examples. Finally, we demonstrate how TIRF images can be further improved using established image restoration techniques.

Total Internal Reflection Fluorescence (TIRF) microscopy is a powerful approach to observe structures close to the cell surface at high contrast and temporal resolution. We demonstrate how TIRF can be employed to study protein dynamics at the cortex of cell wall-enclosed bacterial and fungal cells.

皮层组织和动态可视化的微生物，利用全内反射荧光显微镜

TIRF microscopy has emerged as  a powerful imaging technology to study spatio-temporal dynamics of fluorescent molecules  in vitro and in living cells1. ...

科研

生物工程

Visualizing Single Molecular Complexes In Vivo Using Advanced Fluorescence Microscopy

Full insight into the mechanisms of living cells can be achieved only by investigating the key processes that elicit and direct events at a cellular level. To date the shear complexity of biological systems has caused precise single-molecule experimentation to be far too demanding, instead focusing on studies of single systems using relatively crude bulk ensemble-average measurements. However, many important processes occur in the living cell at the level of just one or a few molecules; ensemble measurements generally mask the stochastic and heterogeneous nature of these events. Here, using advanced optical microscopy and analytical image analysis tools we demonstrate how to monitor proteins within a single living bacterial cell to a precision of single molecules and how we can observe dynamics within molecular complexes in functioning biological machines. The techniques are directly relevant physiologically. They are minimally-perturbative and non-invasive to the biological sample under study and are fully attuned for investigations in living material, features not readily available to other single-molecule approaches of biophysics. In addition, the biological specimens studied all produce fluorescently-tagged protein at levels which are almost identical to the unmodified cell strains ("genomic encoding"), as opposed to the more common but less ideal approach for generating significantly more protein than would occur naturally ('plasmid expression'). Thus, the actual biological samples which will be investigated are significantly closer to the natural organisms, and therefore the observations more relevant to real physiological processes.

Visualizing Single Molecular Complexes In Vivo Using Advanced Fluorescence Microscopy

Here we demonstrate the protocols for performing single-molecule fluorescence microscopy on living bacterial cells to enable functional molecular complexes to be detected, tracked and quantified.

可视化单分子络合物在体内使用高级荧光显微

Full insight into the mechanisms of living cells can be achieved only by investigating the key processes that elicit and direct events at a cellular ...

生物学

Analysis of the Development of a Morphological Phenotype as a Function of Protein Concentration in Budding Yeast

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of phenotype development as a function of protein concentration at population and single-cell levels in Saccharomyces cerevisiae. Although this protocol is based on the overexpression of a protein, it can easily be adapted for morphological phenotypes dependent on suppression of protein expression. Our lab is interested in studying the signaling properties of the endocytic adaptor protein epsin. To that purpose we used a dominant negative approach in which we over-expressed the conserved Epsin N-Terminal Homology (ENTH) domain in order to interfere with the functions of endogenous epsin-2 (Ent2 or YLR206W). We observed that overexpression of the ENTH domain of Ent2 (ENTH2) in wild type cells led to a cell division defect that is dependent on the mislocalization of a family of scaffolding proteins, septins.

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of phenotype development as a function of protein concentration at population and single-cell levels in Saccharomyces cerevisiae.

在芽殖酵母中的蛋白浓度的功能形态学表型的发展分析

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of ...

Visualizing Yeast Organelles with Fluorescent Protein Markers

The budding yeast, Saccharomyces cerevisiae, is a classic model system in studying organelle function and dynamics. In our previous works, we have constructed fluorescent protein-based markers for major organelles and endomembrane structures, including the nucleus, endoplasmic reticulum (ER), Golgi apparatus, endosomes, vacuoles, mitochondria, peroxisomes, lipid droplets, and autophagosomes. The protocol presented here describes the procedures for using these markers in yeast, including DNA preparation for yeast transformation, selection and evaluation of transformants, fluorescent microscopic observation, and the expected outcomes. The text is geared toward researchers who are entering the field of yeast organelle study from other backgrounds. Essential steps are covered, as well as technical notes about microscope hardware considerations and several common pitfalls. It provides a starting point for people to observe yeast subcellular entities by live-cell fluorescent microscopy. These tools and methods can be used to identify protein subcellular localization and track organelles of interest in time-lapse imaging.

Here we describe the use of a set of fluorescent protein-based organelle markers in live-cell imaging of the budding yeast, Saccharomyces cerevisiae.

The budding yeast, Saccharomyces cerevisiae, is a classic model system in studying organelle function and dynamics. In our previous works, we have ...

生物化学

Yeast Colony Embedding Method

Patterning of different cell types in embryos is a key mechanism in metazoan development. Communities of microorganisms, such as colonies and biofilms also display patterns of cell types. For example, in the yeast S. cerevisiae, sporulated cells and pseudohyphal cells are not uniformly distributed in colonies. The functional importance of patterning and the molecular mechanisms that underlie these patterns are still poorly understood.
One challenge with respect to investigating patterns of cell types in fungal colonies is that unlike metazoan tissue, cells in colonies are relatively weakly attached to one another. In particular, fungal colonies do not contain the same extensive level of extracellular matrix found in most tissues . Here we report on a method for embedding and sectioning yeast colonies that reveals the interior patterns of cell types in these colonies. The method can be used to prepare thick sections (0.5 &mu;) useful for light microscopy and thin sections (0.1 &mu;) suitable for transmission electron microscopy. Asci and pseudohyphal cells can easily be distinguished from ovoid yeast cells by light microscopy , while the interior structure of these cells can be visualized by EM.
The method is based on surrounding colonies with agar, infiltrating them with Spurr's medium, and then sectioning. Colonies with a diameter in the range of 1-2 mm are suitable for this protocol. In addition to visualizing the interior of colonies, the method allows visualization of the region of the colony that invades the underlying agar.

A method for embedding yeast colonies allowing sectioning for light and electron microscopy. This protocol allows determination of the distribution of sporulated cells and pseudohyphal cells within colonies providing a new tool toward understanding the organization of cell types within a fungal community.

酵母殖民地嵌入方法

Patterning of  different cell types in embryos is a key mechanism in metazoan development. Communities of microorganisms, such as colonies and biofilms ...

A Fluorescence Microscopy Assay for Monitoring Mitophagy in the Yeast Saccharomyces cerevisiae

Autophagy is important for turnover of cellular components under a range of different conditions. It serves an essential homeostatic function as well as a quality control mechanism that can target and selectively degrade cellular material including organelles1-4. For example, damaged or redundant mitochondria (Fig. 1), not disposed of by autophagy, can represent a threat to cellular homeostasis and cell survival. In the yeast, Saccharomyces cerevisiae, nutrient deprivation (e.g., nitrogen starvation) or damage can promote selective turnover of mitochondria by autophagy in a process termed mitophagy 5-9.
We describe a simple fluorescence microscopy approach to assess autophagy. For clarity we restrict our description here to show how the approach can be used to monitor mitophagy in yeast cells. The assay makes use of a fluorescent reporter, Rosella, which is a dual-emission biosensor comprising a relatively pH-stable red fluorescent protein linked to a pH-sensitive green fluorescent protein. The operation of this reporter relies on differences in pH between the vacuole (pH ~ 5.0-5.5) and mitochondria (pH ~ 8.2) in living cells. Under growing conditions, wild type cells exhibit both red and green fluorescence distributed in a manner characteristic of the mitochondria. Fluorescence emission is not associated with the vacuole. When subjected to nitrogen starvation, a condition which induces mitophagy, in addition to red and green fluorescence labeling the mitochondria, cells exhibit the accumulation of red, but not green fluorescence, in the acidic vacuolar lumen representing the delivery of mitochondria to the vacuole. Scoring cells with red, but not green fluorescent vacuoles can be used as a measure of mitophagic activity in cells5,10-12.

A Fluorescence Microscopy Assay for Monitoring Mitophagy in the Yeast Saccharomyces cerevisiae

A robust approach to monitor the delivery of organelles to the acidic lumen of the yeast vacuole for degradation and recycling is described. The method relies on the specific labeling of target organelles with a genetically encoded dual-emission fluorescence pH-biosensor, and visualization of individual cells using fluorescence microscopy.

在酵母用于监测Mitophagy荧光显微镜检测酿酒酵母

Autophagy is important for turnover of cellular components under a range of different conditions. It serves an essential homeostatic function as well as a ...

Quantitative Live Cell Fluorescence-microscopy Analysis of Fission Yeast

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using fluorochromes like Green Fluorescent Protein (GFP) directly attached to the protein of interest has become increasingly popular 1. Using GFP and similar fluorochromes the subcellular localisations and movements of proteins can be detected in a fluorescent microscope. Moreover, also the subnuclear localisation of a certain region of a chromosome can be studied using this technique. GFP is fused to the Lac Repressor protein (LacR) and ectopically expressed in the cell where tandem repeats of the lacO sequence has been inserted into the region of interest on the chromosome2. The LacR-GFP will bind to the lacO repeats and that area of the genome will be visible as a green dot in the fluorescence microscope. Yeast is especially suited for this type of manipulation since homologous recombination is very efficient and thereby enables targeted integration of the lacO repeats and engineered fusion proteins with GFP 3. Here we describe a quantitative method for live cell analysis of fission yeast. Additional protocols for live cell analysis of fission yeast can be found, for example on how to make a movie of the meiotic chromosomal behaviour 4. In this particular experiment we focus on subnuclear organisation and how it is affected during gene induction. We have labelled a gene cluster, named Chr1, by the introduction of lacO binding sites in the vicinity of the genes. The gene cluster is enriched for genes that are induced early during nitrogen starvation of fission yeast 5. In the strain the nuclear membrane (NM) is labelled by the attachment of mCherry to the NM protein Cut11 giving rise to a red fluorescent signal. The Spindle Pole body (SPB) compound Sid4 is fused to Red Fluorescent Protein (Sid4-mRFP) 6. In vegetatively growing yeast cells the centromeres are always attached to the SPB that is embedded in the NM 7. The SPB is identified as a large round structure in the NM. By imaging before and 20 minutes after depletion of the nitrogen source we can determine the distance between the gene cluster (GFP) and the NM/SPB. The mean or median distances before and after nitrogen depletion are compared and we can thus quantify whether or not there is a shift in subcellular localisation of the gene cluster after nitrogen depletion.

The fission yeast, Schizosaccharomyces pombe, is a good model system to study basic cellular processes. Here we describe a method to perform quantitative live cell analysis of fission yeast. In this particular experiment we focus on organisation of the genome within the cell nucleus, but the method can also be used to study cytosolic factors.

裂殖酵母的活细胞定量荧光显微镜分析

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using ...

Acquiring Fluorescence Time-lapse Movies of Budding Yeast and Analyzing Single-cell Dynamics using GRAFTS

Fluorescence time-lapse microscopy has become a powerful tool in the study of many biological processes at the single-cell level. In particular, movies depicting the temporal dependence of gene expression provide insight into the dynamics of its regulation; however, there are many technical challenges to obtaining and analyzing fluorescence movies of single cells. We describe here a simple protocol using a commercially available microfluidic culture device to generate such data, and a MATLAB-based, graphical user interface (GUI) -based software package to quantify the fluorescence images. The software segments and tracks cells, enables the user to visually curate errors in the data, and automatically assigns lineage and division times. The GUI further analyzes the time series to produce whole cell traces as well as their first and second time derivatives. While the software was designed for S. cerevisiae, its modularity and versatility should allow it to serve as a platform for studying other cell types with few modifications.

We present a simple protocol to obtain fluorescence microscopy movies of growing yeast cells, and a GUI-based software package to extract single-cell time series data. The analysis includes automated lineage and division time assignment integrated with visual inspection and manual curation of tracked data.

获取荧光时间推移电影的芽殖酵母和分析单细胞动力学移植物

Fluorescence time-lapse microscopy has become a powerful tool in the study of many biological processes at the single-cell level. In particular, movies ...

High-resolution Imaging and Analysis of Individual Astral Microtubule Dynamics in Budding Yeast

Dynamic microtubules are fundamental to many cellular processes, and accurate measurements of microtubule dynamics can provide insight into how cells regulate these processes and how genetic mutations impact regulation. The quantification of microtubule dynamics in metazoan models has a number of associated challenges, including a high microtubule density and limitations on genetic manipulations. In contrast, the budding yeast model offers advantages that overcome these challenges. This protocol describes a method to measure the dynamics of single microtubules in living yeast cells. Cells expressing fluorescently tagged tubulin are adhered to assembled slide chambers, allowing for stable time-lapse image acquisition. A detailed guide for high-speed, four-dimensional image acquisition is also provided, as well as a protocol for quantifying the properties of dynamic microtubules in confocal image stacks. This method, combined with conventional yeast genetics, provides an approach that is uniquely suited for quantitatively assessing the effects of microtubule regulators or mutations that alter the activity of tubulin subunits.

Budding yeast is an advantageous model for studying microtubule dynamics in vivo due to its powerful genetics and the simplicity of its microtubule cytoskeleton. The following protocol describes how to transform and culture yeast cells, acquire confocal microscopy images, and quantitatively analyze microtubule dynamics in living yeast cells.

高分辨率成像和芽殖酵母个人星体微管动力学分析

Dynamic microtubules are fundamental to many cellular processes, and accurate measurements of microtubule dynamics can provide insight into how cells ...

4D Microscopy of Yeast

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments in yeast are dynamic, and a full understanding of their properties requires time-lapse imaging. Multi-color 4D confocal fluorescence microscopy is a powerful method for tracking the behavior and composition of an intracellular compartment on a time scale of 5-15 min. Rigorous analysis of compartment dynamics requires the capture of thousands of optical sections. To achieve this aim, photobleaching and phototoxicity are minimized by scanning rapidly at very low laser power, and the pixel dimensions and Z-step intervals are set to the largest values that are compatible with sampling the image at full resolution. The resulting 4D data sets are noisy but can be smoothed by deconvolution. Even with high quality data, the analysis phase is challenging because intracellular structures are often numerous, heterogeneous, and mobile. To meet this need, custom ImageJ plugins were written to array 4D data on a computer screen, identify structures of interest, edit the data to isolate individual structures, quantify the fluorescence time courses, and make movies of the projected Z-stacks. 4D movies are particularly useful for distinguishing stable compartments from transient compartments that turn over by maturation. Such movies can also be used to characterize events such as compartment fusion, and to test the effects of specific mutations or other perturbations.

This protocol describes the analysis of fluorescently labeled intracellular compartments in budding yeast using multi-color 4D (time-lapse 3D) confocal microscopy. The imaging parameters are chosen to capture adequate signals while limiting photodamage. Custom ImageJ plugins allow labeled structures to be tracked and quantitatively analyzed.

酵母的4D显微镜

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments ...